Roadmap Of System Commands - Nortel Secure Network Access Switch 4050 User Manual
Secure network access switch
Hide thumbs
Also See for Nortel Secure Network Access Switch 4050:
- Configuration (44 pages) ,
- Installation manual (46 pages)
Table of Contents
Advertisement
460 Chapter 10 Configuring system settings
•
Roadmap of system commands
The following roadmap lists the CLI commands to configure cluster-wide
parameters and the Nortel SNAS 4050 host within the cluster. Use this list as a
quick reference or click on any entry for more information:
Command
/cfg/sys
/cfg/sys/host <host ID>
/cfg/sys/host
<host ID>/interface
<interface ID>
/cfg/sys/routes
320818-A
disabling SSL traffic trace commands (see
the CLI" on page
463)
"Configuring system settings using
Parameter
mip <IPaddr>
distrace
ip <IPaddr>
sysName <name>
sysLocatio <location>
license <key>
gateway <IPaddr>
ports
hwplatform
halt
reboot
delete
ip <IPaddr>
netmask <mask>
gateway <IPaddr>
vlanid <tag>
mode failover|trunking
primary <port>
delete
list
Advertisement
Table of Contents
