Viewing Alarm Events Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

666 Chapter 13 Viewing system information and performance statistics
/info
followed by:
events
logs

Viewing alarm events using the CLI

To view active alarms, use the following command:
/info/events
The Events menu displays.
The Events menu includes the following options:
/info/events
followed by:
alarms
download <protocol>
<server> <filename>
320818-A
Accesses the Events menu, in order to view and
download active alarms and logged events (see
"Viewing alarm events using the CLI" on page
Accesses the Logs menu, in order to view and
download log files (see
on page 667).
Displays all alarms in the active alarm list, by their main
attributes: severity level, alarm ID number, date and
time when triggered, alarm name, sender, and cause.
To alert the operator at system logon, a notice is
displayed if there are active alarms.
Alarms are also sent as syslog messages.
Transmits the event log file from the Nortel SNAS 4050
cluster to a file on the specified TFTP/FTP/SFTP file
exchange server. You are prompted to provide the
following information:
• is the export protocol. Options are
protocol
tftp|ftp|scp|sftp.
• is the host name or IP address of the
server
server.
• is the name of the destination log file
filename
on the file exchange server.
"Viewing log files using the CLI"
The default is
tftp
666).
.