Variables - Nortel Secure Network Access Switch 4050 User Manual

•
•

Variables

You can use variables in some commands and features in the Nortel SNAS 4050
software.
TIP: Variables included in links are URL encoded. Variables included in static
texts are not URL encoded.
Table 181
Table 181
Variables
Variable
<var:user>
<var:password>
<var:group>
<var:portal>
<var:domain>
<var:method>
<var:sslsid>
<md5:...>
<base64:...>
<var:tgFailureReason> Expands to the TunnelGuard rule expression and the TunnelGuard rule comment
<var:tgFailureDetail>
Operator-defined
variables
it can also be expressed as
255.255.255.0
255.255.255.255
describes variables and their use.
Use
Expands to the user name specified when the user logged on to the domain.
Expands to the password specified when the user logged on to the domain. .
Expands to the group to which the logged on user is a member.
Expands to the Portal IP address. TIP: The variable can be included in redirect
URLs.
Expands to the domain name specified for the authentication method of the logged
on user.
Expands to the access protocol used (http or https).
Expands to the SSL session ID in binary format.
Expands the variable or variables (for example, <md5:<user>:<password>>) and
computes an MD5 checksum which is Base 64 encoded. TIP: Can be used when
creating dynamic HTTP headers.
Expands the variable or variables (for example, <base64:<user>:<password>>)
and encodes them using Base 64. TIP: Can be used when creating dynamic HTTP
headers.
specified for the current SRS rule when a TunnelGuard check has failed.
Expands to the software definition comment specified for the current SRS rule,
including additional failure details, when a TunnelGuard check has failed.
Custom variables can be created to retrieve the desired values from RADIUS and
LDAP databases.
it can also be expressed as
Nortel Secure Network Access Switch 4050 User Guide
Appendix A CLI reference 811
24
32