Configuring Radius Authentication Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

2
Click Add.
The Add an Authentication Server dialog box opens (see
page 272).
3
In the list, select the authentication type you want to add. Available options
are:
— Radius
— LDAP
— Local
The default value is Radius. Fields displayed on the Add an Authentication
Server dialog change, depending on the method you select.
4
Continue with the appropriate section for the authentication method being
added:
• For RADIUS authentication, go to
using the SREM" on page 271
• For LDAP authentication, go to
the SREM" on page 282
• For Local authentication, go to
authentication using the SREM" on page 298

Configuring RADIUS authentication using the SREM

To configure the Nortel SNAS 4050 to use RADIUS authentication, perform the
following steps:
1 Add the RADIUS method to the domain and specify the RADIUS server (see
"Adding the RADIUS method and server" on page
2 Modify the RADIUS configuration settings, if desired (see
RADIUS configuration" on page
3 Add extra RADIUS servers, for redundancy, if desired (see
additional RADIUS servers" on page
Chapter 6 Configuring authentication 271
"Configuring RADIUS authentication
"Configuring LDAP authentication using
"Configuring local database
273)
279)
Nortel Secure Network Access Switch 4050 User Guide
Figure 61 on
272)
"Modifying
"Managing