Checking Configuration Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

Checking configuration using the SREM

You can check connectivity to verify that the Nortel SNAS 4050 is able to contact
gateways, routers, DNS servers, and authentication servers in the system
configuration. The command also checks if the Nortel SNAS 4050 can connect to
web servers specified in group links. The SREM displays the result of the
connectivity check as well as the method used for the check (for example, ping).
To check the configuration, perform the following steps:
1
Figure 225
Check Configuration
2
3
Select the System > Maintenance > Check Configuration tab.
The Check Configuration screen appears (see
Click Check Configuration.
When the check is complete, results are displayed on the screen.
Chapter 14 Maintaining and managing the system 741
Nortel Secure Network Access Switch 4050 User Guide
Figure 225).