Specifying Authentication Fallback Order Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

/cfg/domain 1/aaa/auth #/local
followed by:
export <protocol>
<server> <filename>
<key>

Specifying authentication fallback order using the CLI

Authentication in the Nortel SNA solution is performed by checking client
credentials against available authentication databases until the first match is
found. You specify the order in which the Nortel SNAS 4050 applies the methods
configured for the Nortel SNAS 4050 domain.
Chapter 6 Configuring authentication 267
Exports the local database to the specified
TFTP/FTP/SCP/SFTP file exchange server. You are
prompted to provide the following information:
• is the export protocol. Options are
protocol
tftp|ftp|scp|sftp.
• is the host name or IP address of the
server
server.
• is the name of the destination
filename
database file on the server (for example,
• is the password key for user password
key
protection. If you are not protecting the file with a
key, enter any characters (a minimum of four) when
prompted.
• FTP user name and password, if applicable.
The file is exported in ASCII format. Each row entry
consists of values for user name, password
(encrypted), and group, separated by a colon. The
following is an example of an exported user record with
the password encrypted:
john:$2$7á?yLs...ßìöonž±†:trusted
where $2$ indicates an encrypted password
Nortel Secure Network Access Switch 4050 User Guide
).
db.txt