Configure The Network Core Router - Nortel Secure Network Access Switch 4050 User Manual

Figure 243
After all DHCP scopes have been created

Configure the network core router

There are no special requirements for the core router in a Nortel SNA network.
Refer to the regular documentation for the type of router used in your network.
1
Figure 243 shows the DHCP scopes created for use in this example.
Create the Red, Yellow, Green, VoIP, and Nortel SNAS 4050 management
VLANs.
Chapter 17 Configuration example 789
Nortel Secure Network Access Switch 4050 User Guide