Adding An Ssh Key For A Known Host Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

Adding an SSH key for a known host using the SREM

You can paste public SSH keys from remote hosts as a convenience, so that you do
not get prompted to accept a new key during later use of SCP or SFTP for file or
data transfer.
To achieve strict "man in the middle" protection, verify the fingerprint before
applying the changes.
To add the public SSH key of a known remote host, use the following steps:
1
Figure 159
Add SSH Key
Click the Add SSH Key tab.
The Add SSH Key screen appears (see
Chapter 10 Configuring system settings 553
Figure
Nortel Secure Network Access Switch 4050 User Guide
159).