Table of Contents
Advertisement
14 Problem Solving
Error Code
016-592
[Cause]
[Remedy] When [Add to Existing Folder] is set as the process to be executed in case of a file name
016-593
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
016-594
[Cause]
016-595
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
016-596
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
016-597
[Cause]
[Remedy] Stop all accesses from the other devices, and then execute the operation again. If the
016-598
[Cause]
016-599
[Remedy] Take one of the following measures:
For more information on [Quality/File Size], refer to "5 Scan" > "E-mail Options/Filing Options" > "Quality/File Size
(Specifying an Image Compression Ratio When Scanning)" in the User Guide.
For more information on [Maximum Split Count], refer to "Maximum Split Count" (P.200).
016-700
[Cause]
[Remedy] On the print driver, set the passcode string equal to or longer than the value specified in
016-701
[Cause]
[Remedy] Stop unnecessary ports or delete unnecessary data to increase memory.
016-702
[Cause]
14
[Remedy] Take one of the following measures:
For more information on the [Image Quality], refer to the help of the print driver. For more information about memory,
refer to "Allocate Memory" (P.171).
408
Cause and Remedy
The machine failed to access the NEXTNAME.DAT file using FTP of the Scan to PC
service.
duplication, check the NEXTNAME.DAT file is correct.
The machine failed to transfer data using FTP of the Scan to PC service because an
internal error occurred after connection to the FTP server.
Support Center.
The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
Support Center.
The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
Support Center.
The machine failed to transfer data using FTP of the Scan to PC service because a
network error occurred.
error still is not resolved, contact our Customer Support Center.
The size of an e-mail page exceeds the maximum message size because of page
splitting.
Reduce the file size for [Quality/File Size].
Increase the value for [Maximum Split Count].
The job was suspended because the number of the digits for the Secure Print or Charge
Print passcode set on the print driver was less than the value specified in [Minimum
Passcode Length for Stored Job] on the machine.
[Minimum Passcode Length for Stored Job].
Unable to process print data because of insufficient memory.
Unable to process print data because of insufficient print page buffer.
Set [Image Quality] to [Standard].
Increase the print page buffer size.
Advertisement
Table of Contents
