Error Code
073-310
[Cause]
An error occurred in Tray 3.
073-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
074-310
[Cause]
An error occurred in Tray 4.
074-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
077-322
[Cause]
An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
077-327
[Cause]
Tray modules exceeding the prescribed number or the ones for other machine types are
connected.
[Remedy] Remove unnecessary tray modules.
092-316
[Cause]
Temperature sensor of the machine detected abnormality.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
092-321
[Cause]
Density of Black color is low. Drum cartridge or toner cartridge may not be set properly.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, pull out the drum
cartridge (black) and the toner cartridge (black), and then insert them again.
If the error still is not resolved, contact our Customer Support Center.
093-320
[Cause]
An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
099-373
[Cause]
An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
102-356
[Cause]
An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
103-310
[Cause]
An error occurred.
103-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
103-312
on the machine power. If the same message is displayed again, contact our Customer
103-313
Support Center.
103-314
116-210
[Cause]
An error occurred in the USB memory device.
116-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
116-212
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Cause and Remedy
Error Code
14
473