Table of Contents
Advertisement
Print User ID
When printing using a print driver, specify whether or not to print user ID set in the print
driver on paper. The first 64 letters of the user ID are printed.
Select a position to print from [Top Left], [Top Right], [Bottom Left], and [Bottom Right].
Note
• To use the Print user ID feature, the user ID must be set in the print driver beforehand. For more
• When user ID set in the print driver is not available, "Unknown User" is printed.
Banner Sheet
You can output a banner sheet to separate different jobs by users not to be mixed the
outputs. The machine outputs the banner sheet before or after the job.
A date, time, user name, and file name are printed on the banner sheet.
Note
• Even if stapling is selected, banner sheets are not stapled.
• When a document is printed from a Macintosh, the document name is not printed on the banner
• When printed, banner sheets are counted by meter.
Off
Does not print banner sheets.
Start Sheet
Prints a banner sheet before a print job.
End Sheet
Prints a banner sheet after a print job.
Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
Allow Print Driver to Override
Select the check box to print a banner sheet according to the banner sheet print settings of
the print driver.
Banner Sheet Offset
Set whether or not to offset when banner sheets are output.
Banner Sheet Tray
Select a paper tray used for banner sheets.
This setting applies to Trays 1 and 2 to 4 (optional). You cannot apply this setting to Tray 5.
PostScript Paper Supply
Select whether the PostScript Deferred Media Selection feature is enabled or disabled when
the paper tray is selected. Select [Auto Select] to enable the PostScript Deferred Media
Selection feature, or [Select Paper Tray] to disable the feature.
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
Note
• Even when you select [Auto Select], the setting is automatically changed to [Select Paper Tray] when
• This feature does not appear for some models. An optional component is required. For more
information, refer to the help of the print driver.
sheet.
[Use Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print PostScript data.
information, contact our Customer Support Center.
Print Service Settings
5
175
Advertisement
Table of Contents
