Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 475

Unable to connect using an IPv6 address
You cannot connect to the
machine with the link-local
address.
The machine cannot connect
to a computer running
Windows OS that supports
IPv6.
A device outside the router
cannot be searched.
The Secure Watermark feature
does not function correctly
when you submit a print job via
an IPv6 network.
When SSL is enabled on
CentreWare Internet Services,
even if you specify "http://[IPv6
address]", you are not
redirected to "https://[IPv6
address]".
Unable to print using an IPv6 address
On an IPv6 network without a
DNS server, a computer
running Windows OS that
supports IPv6 cannot be
connected to a Windows
shared printer.
Symptom
When you specify the machine's link-local address, a scope ID
must be appended to the address.
For example, when you use Internet Explorer 7 on Windows
Vista to access the address "fe80::203:baff:fe48:9010", you
must append the Ethernet adapter local area connection
number (for example, 8) for Windows Vista to the address as
follows: fe80::203:baff:fe48:9010%8
Assign a static IPv6 address to the computer running Windows
OS that supports IPv6.
Then, register the IPv6 address on the machine as host address
to allow communication.
When searching for a device outside the router via SMB, directly
specify the address. Multicasting is supported only within a local
link (FF02::1).
Use an IPv4 network for the Secure Watermark feature. The
Secure Watermark feature does not function on an IPv6
network.
When SSL is enabled, directly specify "https://[IPv6 address]".
Symptom
Register the computer name of the machine on the "hosts" file
stored on the computer running Windows OS that supports IPv6.
For example, register in the following file:
C:\Windows\system32\driver\etc\hosts
Network-related Problems
Remedy
Remedy
15
475