Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 498

15 Problem Solving
Error Code
016-722 [Cause]
[Remedy] Confirm the staple position and the paper size, and try printing again.
016-723
[Cause]
[Remedy] Confirm the punch position and the paper size, and try printing again.
016-724 [Cause]
[Remedy] Specify the staple and punch positions on the same side, and try printing again.
016-725
[Cause]
[Remedy] Do not use the Job Flow feature. Simply scan the document from the machine's [Fax]
016-726
[Cause]
[Remedy] The Adobe PostScript 3 Kit (optional) must be installed.
016-727 [Cause]
[Remedy] The file could not be stored into the folder because the machine determined the print
016-728 [Cause]
[Remedy] Confirm the print data.
016-729 [Cause]
[Remedy] Change the number of colors or resolution for the TIFF file, and execute the operation
016-731 [Cause]
[Remedy] Retry printing.
016-732
[Cause]
[Remedy] Resend the form data.
016-733 [Cause]
[Remedy] For 1), confirm the e-mail address.
15
016-735 [Cause]
[Remedy] Retry printing after waiting for a while.
016-738 [Cause]
[Remedy] Specify a paper size supported for booklet creation, and try printing again.
498
Cause and Remedy
The staple position specified is not supported by the machine, or the paper size specified
is not supported by the finisher.
The punch position specified is not supported by the machine, or the paper size
specified is not supported by the finisher.
The specified staple and punch position combination is unsupported.
A scanned document stored in a folder was to be sent by fax using the Job Flow feature,
but the file in the folder could not be converted to fax data.
screen to send it by fax.
Unable to automatically select a printer language because PostScript data was sent
with no Adobe PostScript 3 Kit (optional) installed.
A print job was cancelled without storing a file into a folder because the file was
determined as not containing any pages.
file as not containing any pages. Disable [Skip Blank Pages] on the [Advanced] tab on
the print driver, or add text to the file if the file is blank.
An unsupported tag is included in the TIFF file.
Unable to print because the number of colors or the resolution of the TIFF file exceeds
the allowed range.
again.
Unable to print TIFF data because it was interrupted.
The form specified by emulation has not been registered at the host side.
Probable causes are as follows:
1)Unable to obtain the IP address (the string after "@" in the destination e-mail address)
when e-mail is sent.
2)DNS server was unable to resolve the Internet address (the string after "@") by the
DNS server when e-mail is sent.
For 2), confirm the DNS server address.
Attempted to print [Job Template List] while updating the job template.
Unsupported paper size was specified when specifying booklet creation with PostScript
(optional).