Authentication For Job Flow Sheets And Folders; Creating / Using Job Flow Sheet - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

Authentication for Job Flow Sheets and Folders

This section describes the restrictions of job flows, and folders.

Creating / Using Job Flow Sheet...............................................................................................................................................421

Creating / Using Folder...............................................................................................................................................................422
Creating / Using Job Flow Sheet
You can create the job flow sheets for the documents stored in folders.
The restrictions of the two job flow sheets created when the authentication feature is used
and when that is not used, are different. Also, the restrictions of the job flow sheets created
on the [Create Folder], [Send from Folder], or [Create Job Flow Sheet] screen are different.
Important • When you switch the Login to Local Accounts feature from [enable] to [disable] or vice versa, all the
Note
For information on the job flow sheets which can be created on the machine, refer to "Create Job Flow Sheet" (P.281).
When the Authentication Feature is Enabled
Note
 Creating Job Flow Sheet on the [Create Folder] screen / [Send from Folder] screen
The following shows the creator of job flow sheet, manageable user, and available
operations.
Creator of Job Flow Sheet
Login User
System Administrator
Note
job flow sheets used till then become unavailable besides for the system administrator. In this case,
delete all the job flow sheets and create new ones.
• When you change [Login Type] to [Login to Remote Accounts] or to another login type from [Login
to Remote Accounts], the job flow sheets that was used before the change will be deleted.
• When a job flow sheet which becomes unavailable due to the change of the login type is associated
with a folder, the job flow sheet is available, but cannot be edited or copied. However, when the
association is invalid, the job flow sheet will not be displayed.
• A job flow sheet created on the [Create Folder] screen or the [Send from Folder] screen can only be
used for the folder on which the job flow sheet is created. The job flow sheet cannot be used for any
other folders.
• The job flow sheets created on the network cannot be edited or copied on the machine.
• When using Device Setup Tool, the job flow sheets for the documents stored in the folders and the
scan documents can be created on the network. Device Setup Tool is downloaded from ApeosWare
Management Suite on our official web site.
• When the Authentication feature is enabled, the following users can use the job flow sheets.
- A login user and a system administrator when [Login Type] is set to [Login to Local Accounts].
- A login user besides guest user when [Login Type] is set to [Login to Remote Accounts].
- A login user when [Verify User Details] is set to [Yes] in [Network Accounting] and [Customize User
Prompts] is set to [Display User ID & Account ID Prompts] or [Display User ID Prompt Only].
Creator / System Administrator
All Login User / System
* : Only the system administrator can operate.
• A user copies a job flow sheet becomes the creator of the copied job flow sheet.

Authentication for Job Flow Sheets and Folders

Manageable User
Administrator
Available Operations
Edit, Display, Copy, Delete,
Select, Run, Link to Folder
Edit*, Display, Copy, Delete*,
Select, Run, Link to Folder
421
14