Setting Date And Time - RADVision SCOPIA XT100 Series User Manual

Setting Date and Time

This page displays fields belonging to minimal settings requirements to have the system function
properly.
Procedure
Step 1
In the Main Menu page, scroll to Settings.
Step 2
Press
Step 3
Navigate to Quick setup 4/6.
Step 4
Use the up and down arrow keys to navigate to the Day field. Press
Control Unit to delete the date. Enter today's date. Use the up and down arrow keys to move to
the next field.
Step 5
Repeat the procedure for the Month, Year, Hour, and Minutes.
Step 6
(Recommended) To synchronize the system with the network time, set Internet time to Yes.
Then select the relevant time zone from the drop-down list. The Day, Month, Year, Hour, and
Minutes will show the new time zone.
Step 7
(Optional) Set the Enable daylight time field to Yes or No according to the current daylight-saving
status of your time zone.
Step 8
Set the Start (dd/mm) and Stop (dd/mm) fields to indicate when daylight saving times start and
end.
Step 9
Press
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.0
Quick setup on the Remote Control Unit.
Figure 1-5
Next to access the next screen or press
Setting Date and Time
No to exit the quick setup wizard.
on the XT1000 Remote
'Getting Started' | 6