Configuring Gatekeeper Settings - RADVision Scopia XT4000 Series User Manual

Step 3

Configuring Gatekeeper Settings

A gatekeeper routes video calls by resolving dial strings (H.323 alias or URI) into the IP address
of an endpoint, and handles the initial connection of calls. If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings as described in this
procedure.
This procedure completes the basic system configuration.
Before you begin
This procedure is performed as part of the basic configuration after
Settings" on page
To access the quick setup wizard, see
Note
If you are modifying these settings after initial setup, navigate to Configure > Network >
H.323 from the Main menu.
Procedure
Step 1
Step 2
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
To configure your gatekeeper's settings, select Next and continue with
Gatekeeper Settings" on page
22. Consult with your network administrator to configure these fields.
Set the Use Gatekeeper list to Yes.
Set the Mode list to Manual.
24.
"Accessing the Quick Setup Procedure" on page
Figure 2-11 Gatekeeper settings
"Configuring
"Configuring Network
18.
Getting Started | 24