Configuring Gatekeeper Settings - RADVision SCOPIA XT4000 Series User Manual

Step 3

Configuring Gatekeeper Settings

Gatekeepers are used to manage and route endpoint-initiated calls and point-to-point calls
(H.323). If your SCOPIA XT Series works in conjunction with a gatekeeper, configure
gatekeeper-related settings as described in this procedure.
This procedure completes the basic system configuration.
Before you begin
This procedure is performed as part of the basic configuration after
Settings" on page
Start the Quick Setup Wizard by selecting Configure > Quick Setup from the Main menu.
Note
If you are modifying these settings after initial setup, navigate to Configure > Network >
H.323 from the Main menu.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
Table 2-1 Configuring IP addresses
Field Name
IP address
SubNet mask
Gateway
DNS
Continue with one of the following:
•
To configure your gatekeeper's settings, select Next and continue with
Gatekeeper Settings" on page
•
To exit the quick setup wizard, select Close.
13. Consult with your network administrator to configure these fields.
Description
Enter the system static IP address here, used for accessing and
managing the system.
If the system retrieves its IP address automatically, this field
displays the IP address assigned to the system.
Enter the subnet mask associated with the IP address.
If the system retrieves its IP address automatically, this field
displays the subnet mask that has been assigned.
Enter the default gateway static IP address. The gateway is used to
route information between two subnets, for example, between the
headquarters and a partner site.
If the system gets its IP address automatically, this field displays the
gateway IP address assigned to the system.
Enter the DNS server IP address. The DNS server in your network
resolves domain names in your network and translates them into IP
addresses.
If the system gets its IP address automatically, this field displays the
assigned DNS server IP address.
15.
"Configuring
"Configuring Network
Getting Started | 15