Serial Communication Setup; Setting Up A Connection On The Mobile Computer (Windows Mobile 2005) - Symbol MC909X Integrator Manual

Serial Communication Setup

The serial communications setup can be used to set up to communicate with a Single Slot Serial/USB Cradle,
MSR or a CAM.
NOTE For serial communication using accessories that can communicate with either a serial or USB
connection, connect only the serial cable. Do not connect both the serial and USB cables. If both serial
and USB communication cables are required, the host computer's USB port must be disabled in
ActiveSync before serial communication can be enabled.
Setting Up a Connection on the Mobile Computer
On the mobile computer tap
1.
ActiveSync Window
Figure 2-51
Tap >
2. Menu Connections
Connections Window
Figure 2-52
Select the Synchronize all PCs using this connection: check box.
3.
Select the connection (e.g., serial COM port, Bluetooth, or USB) for synchronization from the drop-down
4.
list. The default connection for synchronization is USB.
> >
Start Programs ActiveSync
. The window appears.
Connections
(Windows Mobile 2005)
to display the
ActiveSync
Accessories 2 - 47
window.