Sys Stat - Symbol MC909X Integrator Manual

6 - 14 MC909X Integrator Guide

Sys Stat

Use the tab to view system information.
Sys Stat
Tap >
1. Start Settings
or
>
Start Phone
MC9097 Phone Window - Sys Stat Tab
Figure 6-21
Sys Stat Tab Data
Table 6-2
Item
RSSI
SQE
Band Spec
Carrier
Outbound Signal
Tx/Rx Pwr
Temperature
Current Freq
Num WiDEN Chan
Tap ok to exit settings.
2.
> tab >
Personal Phone
> > >
Tools Options Phone Info
Lists the Received Signal Strength Indicator in dBm. Usually between -104 and
-80. -80 is a very strong signal and -104 is very weak.
Lists the Signal Quality estimate. Gives a measure of signal quality where RSSI
gives a measure of signal strength. Values around 20 are good.
Lists the Band Specifier that restricts the modem to a certain band of frequencies.
Lists the current frequency that the modem is tuned into and is interpreted as:
XXX-YZ where XXX is the carrier number, Y is the color code and Z is the
extended color code.
Lists the signal quality of the received RF signal.
Duplicate of RSSI field.
Lists the temperature, in degrees C, of the Motorola iDEN modem.
Lists the receive frequency in MHz of the Motorola iDEN modem. There are just
under 2000 different transmit frequencies supported. This is selected by modem -
carrier negotiations.
Lists the number of WiDEN channels being used to transmit.
icon > tab.
Sys Stat
tab.
Description