Serial Communication Setup; Setting Up A Connection On The Mobile Computer - Symbol MC9000-K/S Reference Manual

Hide thumbs Also See for MC9000-K/S:
Table of Contents

Advertisement

The first ActiveSync operation must be performed with a local, direct
connection.
To retain partnerships after a cold boot, capture partnership registry
information in a .reg file and save it in the Flash File System. Refer to the
SMDK Help File for details.
For more information about using ActiveSync, start ActiveSync on the host computer and refer to
ActiveSync Help.

Serial Communication Setup

For serial communication using accessories that can communicate with
either a serial or USB connection, connect only the serial cable. Do not
connect both the serial and USB cables. If both serial and USB
communication cables are required, the host computer's USB port must be
disabled in ActiveSync before serial communication can be enabled.

Setting Up a Connection on the Mobile Computer

1. On the mobile computer tap Start - ActiveSync to display the ActiveSync window.
Figure 4-8. ActiveSync Window
4-9
Communications

Advertisement

Table of Contents
loading

Table of Contents