Symbol MC909X Integrator Manual page 202

7 - 12 MC909X Integrator Guide
NOTE The mobile computer must be inserted in the cradle or attached to the CAM, both with their appropriate
power supplies connected to a power source, for the mobile computer to reset into IPL.
Release the trigger. The
5.
Initial Program Loader
Platform
Application
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Auto Select
Initial Program Loader (IPL) Menu
Figure 7-9
CAUTION
NOTE If the platform or application partition sizes are changed, you must download a new partition table first.
Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press
6.
Enter.
IPL Menu Partitions
Table 7-2
Partition Name
Platform
Application
Windows CE
Monitor
Splash Screen
Initial Program Loader
To insure a successful download, do not remove power from the mobile computer while in IPL mode.
Contains the files in the Platform folder.
Contains the files in the Application folder.
Contains the operating system for the mobile computer.
Contains the Monitor and IPL programs.
Contains the splash screen that displays while booting the mobile computer.
Note: Splash screens are generated from .bmp images and must be less than or equal to
240 pixels wide and 296 pixels deep. For mono displays, the bmp image must be 4 bpp and
for color screens the color depth must be 8 bpp. Note: 8 bits per pixel only applies to splash
screen images. Once Windows CE is running, the color density is 16 bits per pixel.
menu appears.
Description