Latch Grip
(one on each side)
Attaching the CAM (MC909X-K shown)
Figure 2-24
To remove, squeeze the latch grips and pull the CAM from the mobile computer.
NOTE Remove the CAM from the bottom of the mobile computer before using a cradle for charging and
communication.
Setup
CAUTION
Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. Refer to the
MC909X User Guide for the power supply regulatory compliance statement.
AC Power
Supply
CAM Power Connection
Figure 2-25
Into Cigarette
OR
Vehicle Power
Supply
Accessories 2 - 25
Lighter