Symbol MC909X Integrator Manual page 207

TCM Error Messages (Continued)
Table 7-3
Error
Illegal ESS ID
Disk Full
Target Disk Full
Hex file is READ ONLY
Error opening the file xxx
with write access
Failure creating binary file
Hex File To load is missing
or invalid
Could not locate mobile
computer name in TCM.ini
file
Incorrect disk sizes in
TCM.ini file
INVALID DIRECTORY
One of the disk sizes is
one sector in size
INVALID VOLUME NAME
Corrupt TCM.INI file!
(Invalid value of
VolumeDivisor)
Invalid version of TCM
script file
In the Build ESSID Partition window, no ESS ID was entered or the ESS ID
entered was illegal.
TCM failed to create Hex image file at the selected path. Check available disk
space.
Build process failed because TCM failed to add file to the image of a disk volume.
Remove some files or increase the disk size.
The Hex image file to be created exists and is read-only. Delete the existing file or
change its attribute.
TCM could not open file xxx with write access. Check if file is in use.
TCM failed to open/create an intermediate binary file.
In Load Terminal window, the file selected to load has invalid status.
While loading the Script Properties window, TCM could not find the TCM.ini
section corresponding to the mobile computer type specified by the current
opening script. Either TCM.ini or the script file is invalid.
The total disk size specified in the script does not match the total disk size defined
in the corresponding TCM.ini section. Check if the script is corrupt or the TCM.ini
has changed after the script was created.
In Script Properties window, the selected System File Path is not a valid directory.
In Script Properties window, one of the disks is too small (one sector in size). This
may cause problem while building images, especially when cushion is enabled.
Increase the disk size.
In Script Properties window, one of the volume labels is not valid.
The VolumeDivisor entry is missing or invalid in the TCM.ini. Reinstall TCM or
recover TCM.ini.
The TCM script was not created by this version of TCM.
Application Deployment for WinCE 5.0 7 - 17
Description/Solution