Updating Tcm 1.X Scripts; Copying Components To The Script; Saving The Script; Building The Image - Symbol MC909X Integrator Manual

7 - 10 MC909X Integrator Guide

Updating TCM 1.X Scripts

Script files that were created with older versions of TCM can be upgraded to TCM 2.0 scripts. Click
open an existing script created with an older version of TCM. The Conversion window appears automatically.
Conversion Window - Upgrading to TCM 2.0
Figure 7-6

Copying Components to the Script

Script contents are managed using standard file operations such as
be added to the script by clicking files and folders in the
window. The
File Explorer
holding the
SHIFT

Saving the Script

Modifications to a script file can be saved using the
script writes over the original script. To use a Symbol-supplied standard script as a base and save the changes
in a new script, use the

Building the Image

Once the script is created, the hex image defined by the script can be built.
As part of the build, TCM performs a check on the script which verifies that all files referenced in the script
exist. This check is important for previously created scripts to ensure that files referenced in the script are still
in the designated locations.
To build scripts:
Click on the TCM toolbar. The
1. Build
Configure Build Window
Figure 7-7
window supports standard windows; multiple files may be selected by clicking while
or keys.
CTRL
function.
Save As
Configure Build
New Folder
window and dragging them to the
File Explorer
or the function. Saving changes to an existing
Save Save As
window appears.
Open
, and . Items can
Delete Rename
Script
to