Attaching And Removing; Setup - Symbol MC909X Integrator Manual

Attaching and Removing

To attach, snap the MSR onto the bottom of the mobile computer.
Latch Grip
(one on each side)
Attaching the MSR
Figure 2-19
To remove, squeeze the latch grips and pull the MSR from the mobile computer.
NOTE Remove the MSR from the bottom of the mobile computer before using a cradle for charging and
communication.

Setup

CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. Refer to the
MC909X User Guide for the power supply regulatory compliance statement.
AC Power
Supply
MSR Power Connection
Figure 2-20
Into Cigarette
Vehicle Power
Supply
Accessories 2 - 21
Lighter