Rapid Deployment Window
Table 8-4
Text Box/Button
Please scan all of the bar
codes...
Bar codes left to scan...
About
Reset
Exit
Scanning RD Bar Codes
When the mobile computer scans and successfully decodes a single or multiple RD bar codes, the data
encoded in the bar code can:
Reset the mobile computer's connection profile. A connection profile is a set of Wireless Application
•
parameters that the mobile computer uses to access the wireless network.
Initiate downloads of one or more software packages from an FTP server to the mobile computer.
•
NOTE Currently, RD only recognizes AirBEAM software packages. See
information.
To scan an RD bar code:
Obtain the appropriate RD bar code(s) from the MSP Administrator.
1.
Displays the status of a scanned bar code.
- indicates the mobile computer is ready to scan a bar code.
Waiting
- indicates the mobile computer successfully scanned a bar code. (The
OK
Indicator LED bar on the mobile computer turns green and a beep sounds).
If there are no bar codes left to scan, the
displays.
Displays a list of any remaining bar codes to scan (1-D bar codes only). When all
required bar codes are scanned successfully, the
window displays.
Displays the
Rapid Deployment Client Info
Removes any previously scanned data.
Closes the application. A confirmation window displays. Tap
return to the
Rapid Deployment
Note: Exiting the application prior to scanning all required bar codes discards any
scanned data collected up to that point.
Application Deployment for Mobile 5.0 8 - 15
Description
Rapid Deployment Configuring
Rapid Deployment Configuring
window.
window.
AirBEAM Smart on page 8-17
window
to exit or
to
Yes
No
for more