Tcm Error Messages - Symbol MC909X Integrator Manual

7 - 16 MC909X Integrator Guide
Load Terminal Window - Serial and Ethernet Tabs
Figure 7-15
Select the
17. Image Files To Load
Click
18. Download
During download, the
19.
bar.
When complete,
20.
error.
On completion, press
21.
To exit IPL, select the
22.

TCM Error Messages

TCM validates the cells in the partition table when the Execute button is clicked. Cells highlighted in red contain
an error. Partition loading is disabled until all errors are corrected.
TCM Error Messages
Table 7-3
Error
Failed to build images:
flash file system DLL not
loaded!
Failure finding directory
xxx
Failure creating volume
Failure adding system file
to image
INVALID PATH
Nothing Selected To Build
,
Comm Port
to begin the operation.
screen on mobile computer displays the
Downloading
displays
Device Status Result was Success
to return to the IPL menu to select the next partition to download.
Enter
item from the IPL menu (see
System Reset
TCM could not load the DLL required to build images for the targeting flash file
system. Reinstall TCM or recover the DLL.
Building process failed because directory xxx was not found.
Building process failed because a certain disk volume could not be created.
Build process failed because TCM failed to add a certain system file to the disk
image.
The path for the image file to build is not valid.
In the Config Build window, no item is selected to build.
and from their respective drop-down lists.
Baud Rate
, or in the case of an error, the cause of the
Figure 7-9 on page
Description/Solution
and a progress
Device Status
7-12).