Calibrating The Screen; Checking Battery Status; Configuring The Mobile Computer - Symbol MC909X Integrator Manual

MC9090/4
Symbol Splash Window
Figure 1-7

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears
1.
on the screen.
NOTE To re-calibrate the screen at anytime, press Blue key + ESC on the mobile computer to launch the
calibration screen application.
Repeat as the target moves around the screen or press ESC to cancel.
2.

Checking Battery Status

To check whether the main battery or backup battery in the mobile computer is charged, tap
>
Control Panel Power
To save battery power, set the mobile computer to turn off after a specified number of minutes.

Configuring the Mobile Computer

To customize the mobile computer settings, refer to the Microsoft Applications for Mobile and CE 5.0
•
User Guide.
To set up ActiveSync to synchronize the mobile computer with the host computer, see
•
ActiveSync.
To configure the mobile computer for wireless LAN network, see
•
To configure the mobile computer for WWAN network, see
•
To configure the mobile computer for iDEN network, see
•
To deploy software on the mobile computer, see
•
Chapter 8, Application Deployment for Mobile
MC9097
icon to display the
Battery Status
window.
Chapter 4, Wireless
Chapter 5, MC9094
Chapter 6, MC9097
Chapter 7, Application Deployment for WinCE 5.0
5.0.
Getting Started 1 - 11
> >
Start Settings
Chapter 3,
Applications.
Configuration.
Configuration.
or