Options; Operating Mode Filtering - Symbol MC909X Integrator Manual

4 - 36 MC909X Integrator Guide

Options

Use the wireless
Option

Operating Mode Filtering

•
Regulatory
•
Band Selection
•
System Options
•
Change Password
•
Export.
•
Operating Mode Filtering
The
Operating Mode Filtering
OP Mode Filtering Dialog Box
Figure 4-45
The and
AP Networks
OP Mode Filtering Options
Table 4-23
Field
AP Networks
AD-Hoc Networks
Tap to save the settings or tap X to discard any changes.
Save
Regulatory Options
Use the
Regulatory
(within a country) a mobile computer is only allowed to use certain channels.
dialog box to select one of the following operation options from the drop-down list:
options cause the Find WLANs application to filter the available networks found.
check boxes are selected by default.
Ad-Hoc Networks
Select the
AP Networks
signal strength within the
Application on page
profile for association. If this option was previously disabled, refresh the
WLAN Networks
computer.
Select the
Ad-Hoc Networks
networks and their signal strength within the
are peer networks available to the mobile computer profile for association. If this
option was previously disabled, refresh the
display the Ad Hoc networks available to the mobile computer.
settings to configure the country the mobile computer is in. Due to regulatory requirements
Description
check box to display available AP networks and their
Available WLAN Networks
4-5). These are the APs available to the mobile computer
window to display the AP networks available to the mobile
check box to display available peer (adapter)
(see Find WLANs
Available WLAN Networks
window to
Available WLAN Networks
Available
. These