Serial Communication Setup; Setting Up A Connection On The Mobile Computer - Symbol MC9000-G Product Reference Manual

The first ActiveSync operation must be performed with a local, direct
connection.
Note
To retain partnerships after a cold boot, capture partnership registry
information in a .reg file and save it in the Flash File System. See the
Windows CE Help File for Symbol Terminals for details.
For more information about using ActiveSync, start ActiveSync on the host computer and see
ActiveSync Help.

Serial Communication Setup

For serial communication using accessories that can communicate with
either a serial or USB connection, connect only the serial cable. Do not
Note
connect both the serial and USB cables. If both serial and USB
communication cables are required, the host computer's USB port must be
disabled in ActiveSync before serial communication can be enabled.

Setting Up a Connection on the Mobile Computer

1. On the mobile computer tap Start - ActiveSync to display the ActiveSync window.
Figure 4-8. ActiveSync Window
4-9
Communications