Symbol MC909X Integrator Manual page 240

8 - 16 MC909X Integrator Guide
Launch the RD application on the mobile computer. The Rapid Deployment window displays.
2.
Ready to Scan
No Bar Codes Left to Scan
Rapid Deployment Window
Figure 8-4
Scan the appropriate bar code(s) to complete the configuration and/or download.
3.
A PDF417 bar code (2-D bar code) can contain all download data in a single bar code. In this case,
a.
only one bar code may be required to scan.
Multi-part linear bar codes (1-D bar codes) can require scanning several bar codes. Scan these bar
b.
codes in any order. The text box under
(see Figure
After successfully scanning all appropriate bar codes, the mobile computer connects to the server and the
4.
Rapid Deployment Configuring
Rapid Deployment Window - Configuring
Figure 8-5
NOTE If the
application. If failure to connect to the server persists, see the MSP Administrator.
When configuration is complete:
The screen displays.
Today
•
Ready to Scan
Bar Codes Left to Scan are Listed
8-4).
window displays while network settings are configured.
mobile computer
cannot connect to the server, it continues to retry until you cancel (exit) the
shows the remaining bar codes to scan
Bar codes left to scan...