Symbol MC909X Integrator Manual page 94

2 - 48 MC909X Integrator Guide
Tap ok to exit the
5.
Ensure that ActiveSync is installed on the host computer and a partnership was created.
6.
Select >
7. Start
Microsoft ActiveSync
ActiveSync - Not Connected
Figure 2-53
NOTE Every mobile computer should have a unique device name. Never try to synchronize more than one
mobile computer to the same name.
In the ActiveSync window, select
8.
Connection Settings Window
Figure 2-54
In the
9. Connection Settings
If using a serial connection, select the COM port from the drop-down list.
NOTE If serial, USB and Ethernet communication connections are used, all check boxes can be selected to
avoid having to update this window for different connections.
Tap OK to save any changes made.
10.
Ensure the accessory being used to communicate is connected to the host computer and the appropriate
11.
power source.
window.
Connections
>
Programs Microsoft ActiveSync
window appears.
>
File Connection Settings
window, select the appropriate check box for the type of connection being used.
on the host computer, if it is not already running. The
. The
Connection Settings
window appears.