Page 1 MC909X Mobile Computer User Guide...
Page 3 MC909X User Guide 72E-72215-06 Rev A December 2007...
Page 4: Patents
An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent & Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation.
Page 5: Revision History
Revision History Changes to the original manual are listed below: Change Date Description Rev A 11/1/05 Initial release. -02 Rev A 1/19/06 Add MC9090-K/S, MC9090-G and MC9094-K/S with Windows Mobile 5.0. -03 Rev A 3/21/06 Add MC9097 support. -04 Rev A 3/6/07 Add generic MC9097 information, 33-key keypad, Fusion 2.5 and AKU 3.2 update information.
Page 6 MC909X Mobile Computer User Guide...
Page 7: Table Of Contents
Table of Contents Patents..............................ii Revision History............................ iii About This Guide Introduction ............................v Documentation Set ......................... v Configurations............................vi Software Versions........................... vii Chapter Descriptions ..........................x Notational Conventions ..........................xi Related Documents and Software ......................xi Service Information..........................xii Chapter 1: Getting Started Introduction ............................
Page 8 MC909X Mobile Computer User Guide MC909X-S Strap ..........................1-16 Battery Management ........................... 1-17 Battery Saving Tips ........................1-17 Changing the Power Settings ......................1-17 Changing the Display Backlight Settings ..................... 1-17 Changing the Keypad Backlight Settings ..................... 1-18 Turning Off the Radios ......................... 1-18 On Devices with Mobile 5.0 AKU 1.0 .....................
Page 9 Table of Contents Data Capture ............................2-46 Laser Scanning ..........................2-46 Imaging ............................2-46 Scanning Considerations ....................... 2-47 Scanning Bar Codes ........................2-48 Scan LED Indicator ........................2-49 Resetting the Mobile Computer ......................2-49 Windows CE 5.0 Devices ....................... 2-49 Performing a Warm Boot ......................
Page 10 viii MC909X Mobile Computer User Guide Personal Area Network Services ....................3-21 IrMC Synchronization Services ...................... 3-21 Bluetooth Settings ..........................3-22 Device Info Tab ..........................3-22 Services Tab ..........................3-22 Dial-Up Networking Service ..................... 3-23 File Transfer Service ........................ 3-24 OBEX Object Push Service .....................
Page 11 Table of Contents Chapter 5: Using the MC9097 Phone Introduction ............................5-1 Getting Started ............................. 5-1 Activating Service .......................... 5-1 Phone Properties Page ........................5-1 Finding Your Phone Number and Walkie-Talkie Number .............. 5-1 Accessing the Phone Keypad ......................5-3 Turning the Phone On and Off ......................
Page 12 MC909X Mobile Computer User Guide Replacing the Keypad ........................6-2 Multi Media Card (MMC) / Secure Device (SD) Card ................6-3 Single Slot Serial/USB Cradle ......................6-5 Battery Charging Indicators ......................6-6 Four Slot Ethernet Cradle ........................6-7 Battery Charging Indicators ......................6-8 Four Slot Charge Only Cradle ......................
Page 13 Table of Contents Mobile Computer Pin-Outs ........................A-8 Accessory CAM and MSR Pin-Outs ....................A-9 Non-Incendive Devices ........................A-10 Appendix B: Keypad Special Keys Introduction ............................B-1 Keypads ............................... B-1 Appendix C: Regulatory Introduction ............................C-1 Accessory Power Supply Regulatory Compliance ................C-1 Glossary Index...
Page 14 MC909X Mobile Computer User Guide...
Page 15: About This Guide
The documentation set for the MC909X is divided into guides that provide information for specific user needs. • Microsoft Application Guide - describes how to use Microsoft developed applications. • Symbol Application Guide - describes how to use Symbol developed applications. • MC909X User Guide - describes how to use the MC909X mobile computer. •...
Page 16: Configurations
MC909X Mobile Computer User Guide Configurations This guide covers the following configurations: Data Operating Configuration Radios Display Memory Keypads Other Capture System MC9090-G WLAN: 802.11a/b/g Color or 64 MB RAM Laser, Long Windows 28-key, Haz Loc WPAN: Bluetooth monochrome or 128 MB Range 43-key, Class 1 Div 2...
Page 17: Software Versions
About This Guide Data Operating Configuration Radios Display Memory Keypads Other Capture System MC9094-K WLAN 802.11a/b/g Color 64 MB RAM Laser or Windows 28-key, WPAN: Bluetooth or 128 MB Imager 33-key, Mobile 5.0 WWAN:EDGE/ RAM/ 43-key, Phone GPRS 128 MB 53-key Edition Flash...
Page 18 viii MC909X Mobile Computer User Guide The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 14929.2.2.1 indicates that the device is running AKU version 2.2.1.
Page 19 About This Guide BTExplorer Software To determine the BTExplorer software version on a Mobile 5.0 or Windows CE 5.0 device: icon > > > BTExplorer Show BTExplorer File About Fusion Software To determine the Fusion software version on a Mobile 5.0 or Windows CE 5.0 device: icon >...
Page 20: Chapter Descriptions
MC909X Mobile Computer User Guide Phone Software To determine the Phone software version on a Mobile 5.0 device: > > > > tab. Start Phone Menu Options Version Information MC9097 MC9094 Chapter Descriptions Topics covered in this guide are as follows: •...
Page 21: Notational Conventions
About This Guide Notational Conventions The following conventions are used in this document: • “Mobile computer” refers to the Symbol MC909X series of hand-held computers. • Italics are used to highlight the following: • Chapters and sections in this guide •...
Page 22: Service Information
MC909X Mobile Computer User Guide For the latest version of this guide and all guides, go to: http://support.symbol.com. Service Information If you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. Contact information is available at: http://www.symbol.com/contactsupport.
Page 23: Chapter 1 Getting Started
Chapter 1 Getting Started Introduction This chapter lists the accessories for the mobile computer and explains how to install and charge the batteries, replace the strap and start the mobile computer for the first time. Microphone (Windows Indicator LED Bar Touch Screen Mobile 5.0 only) Scan Button...
Page 24 1 - 2 MC909X Mobile Computer User Guide Microphone Touch Screen Indicator LED Bar Power Scan Button Scan Button or Walkie-Talkie Button Keypad on MC9097-K Battery Release Latch Exit Window Exit Window Headphone Stylus Jack Scan Button Scan Scan Button (MC9094-K) Button Walkie-Talkie...
Page 25 Getting Started 1 - 3 Microphone Touch Screen Indicator LED Bar Power Button Scan Button Scan Button or Walkie-Talkie Button Keypad on MC9097-S Exit Window Exit Window Stylus Headphone Jack Scan Scan Scan Button Button Button (MC9094-S) Walkie-Talkie Strap Button (MC9097-S) Stylus SIM Door...
Page 26: Unpacking The Mobile Computer
Regulatory Guide • Quick Start Guide (poster). Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact the Symbol Global Interactive Center immediately. See page xii for contact information. Accessories Table 1-1...
Page 27 Cradle the mobile computer with a host computer through either a serial or a USB connection. Software Symbol Mobility Developer Kits available at: http://support.symbol.com. Device Configuration Package (DCPforMC9090c50) and Platform SDK (PSDK9090c50) for MC9090-G with Windows CE 5.0 only, available at: http://support.symbol.com.
Page 28: Getting Started
1 - 6 MC909X Mobile Computer User Guide Getting Started In order to start using the mobile computer for the first time: • install the main battery • charge the main battery and backup battery • start the mobile computer •...
Page 29: Charging The Battery
Getting Started 1 - 7 Charging the Battery CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. Charging the Main Battery and Memory Backup Battery Before using the mobile computer for the first time, charge the main battery until the amber charge indicator light remains lit (see Table 1-2 on page 1-8 for charge status indications).
Page 30: Charging Spare Batteries
1 - 8 MC909X Mobile Computer User Guide To charge the main battery: Ensure the accessory used to charge the main battery is connected to the appropriate power source. Insert the mobile computer into a cradle or attach the appropriate snap-on module. The mobile computer starts to charge automatically.
Page 31 Getting Started 1 - 9 Press the secondary battery release, on top of the battery, and slide the battery out of the mobile computer. Primary Battery Releases Secondary Battery Release Removing the Main Battery - MC909X-G/K Figure 1-5 Primary Battery Release Secondary Battery Release Removing the Main Battery - MC909X-S...
Page 32: Starting The Mobile Computer
1 - 10 MC909X Mobile Computer User Guide Starting the Mobile Computer Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a cold boot. See Resetting the Mobile Computer on page 2-49.
Page 33: Sim Card
Getting Started 1 - 11 SIM Card NOTE Subscriber Identification Module (SIM) card is only used in the MC9094 and MC9097 configurations. The SIM card, or smart card, is required for MC9094 (GPRS) phone service and must be obtained from the phone service provider.
Page 34 1 - 12 MC909X Mobile Computer User Guide SIM Holder Unlock SIM Case Figure 1-9 Insert the SIM card, as shown in Figure 1-10, with the cut edge of the card facing out and the contacts facing down. Lower the SIM holder. Inserting the SIM Card Figure 1-10 Lock the metal clip by sliding it to the closed position.
Page 35: Stylus
Getting Started 1 - 13 Press the red POWER button. NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card. If you do swap SIM cards, perform step 10. On the MC9097, you must preform a master rest after installing a new SIM Card. >...
Page 36: Mc9090-G Strap
1 - 14 MC909X Mobile Computer User Guide MC9090-G Strap The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the strap: Disconnect the metal clip at the handle. Open strap loop and slide the handstrap through the loop.
Page 37: Mc909X-K Strap
Getting Started 1 - 15 MC909X-K Strap The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the MC909X-K strap: Lift the loop end of the strap over the button. Loop Button Connection Post...
Page 38: Mc909X-S Strap
1 - 16 MC909X Mobile Computer User Guide Screws Strap Bracket Remove Strap Bracket Figure 1-15 Lift the loop end of the strap over the button. Pull the loop through the connection post. Remove the battery. Reverse the procedure to re-attach the strap. MC909X-S Strap The strap may be moved to either the left or right side of the mobile computer to suit user preferences.
Page 39: Battery Management
Getting Started 1 - 17 Screws Strap Bracket Remove Strap Bracket Figure 1-17 Remove the screw securing the bottom of the strap to the device. Reverse the procedure to re-attach the strap. Battery Management Battery Saving Tips • Leave the mobile computer connected to AC power at all times when not in use. •...
Page 40: Changing The Keypad Backlight Settings
1 - 18 MC909X Mobile Computer User Guide Select the check box and select a value from the drop-down On battery power: Disable backlight if not used for: list box. Tap the tab. Brightness Tap the check box to completely turn off the display backlight. Disable backlight Use the slider to set the brightness of the backlight.
Page 41: Bluetooth And Wwan Radios
Getting Started 1 - 19 Bluetooth and WWAN Radios NOTE The Flight Mode feature only turns off the WWAN and Bluetooth radios. The WLAN radio must be turned off separately. To turn off the Bluetooth and WWAN radios, tap the icon (on non-WWAN devices) or the Connectivity...
Page 42: On Device With Ce 5.0 (Oem Version 01.15 And Lower)
1 - 20 MC909X Mobile Computer User Guide Wireless Manager Window Figure 1-20 To enable or disable a wireless connection, tap its blue bar. To enable or disable all wireless connections, tap and hold the bar. To configure settings for a connection, tap Menu Wireless Manager Menu Figure 1-21...
Page 43: Bluetooth Radio
Getting Started 1 - 21 To turn on the radio: > > > icon > tab. Start Settings Control Panel Power PwrDevices In the text box, scroll down until : displays. WLP1 Select displays in the text box at the top of the window. WLP1: WLP1: In the drop-down list box, select...
Page 44 1 - 22 MC909X Mobile Computer User Guide...
Page 45: Chapter 2 Operating The Mc909X
Chapter 2 Operating the MC909X Introduction This chapter explains the physical buttons, status icons and controls on the mobile computer, how to use the mobile computer, including instructions for powering on and resetting the mobile computer, using the stylus and a headset, entering information and scanning.
Page 46 2 - 2 MC909X Mobile Computer User Guide Status Icons Table 2-1 Status Description Icon Indicates the current time. This icon indicates that the keyboard input panel is selected. This icon indicates that the keyboard input panel is hidden. This icon indicates that the main battery is charging or that the terminal is operating on AC power. Double tapping on this icon opens the window.
Page 47: Status Icons (Windows Mobile 5.0)
Getting Started 2 - 3 Status Icons (Windows Mobile 5.0) Status Bar at the top of the window displays the current time, battery status and communication status. Status Bar Status Icons Start Button Volume Icon Date/Time Status Bar Figure 2-2 Status icons are shown in the to indicate present status of the mobile computer.
Page 48: Command Bar
2 - 4 MC909X Mobile Computer User Guide Status Icons (Continued) Table 2-2 Icon Function Description WWAN Call missed. Voice call. Voice call in progress. Data call in progress. Calls are forwarded. Call on hold. Antenna/signal icon: wireless on/good signal. Antenna/signal icon: wireless off.
Page 49: Speaker Icon
Getting Started 2 - 5 Command Bar Icons Table 2-3 Icon Description Wireless connection status icon. Indicates WLAN signal strength and opens the Wireless Applications menu. icon appears in the task tray and indicates that the Bluetooth radio is on. Bluetooth Enabled icon appears in the task tray and indicates that the Bluetooth radio is off.
Page 50: Battery Icon
2 - 6 MC909X Mobile Computer User Guide NOTE Use can also adjust the system volume using the Sounds & Notifications window or by pressing the Blue key and 6 or the Blue key and 7. Battery Icon In AKU 2.2.1 and lower, the icons display on the when the main battery or backup battery power Battery...
Page 51: Time Icon
Getting Started 2 - 7 Connectivity Dialog Box Figure 2-7 Time Icon NOTE In AKU 2.2 and higher, the Time icon only appears in the Title Bar when an application displays. It does not appear it the Title Bar when the Today screen displays. icon displays the current time in a digital or analog format.
Page 52: Multiple Notification Icon
2 - 8 MC909X Mobile Computer User Guide New E-mail Messages Dialog Box Figure 2-11 Multiple Notification Icon icon appears when two or more message notifications occur. Tap the icon to display the Multiple Notification multiple notification icons. Multiple Notifications Icon Figure 2-12 Locking the Mobile Computer (Windows Mobile 5.0 Only) Use the Device Lock feature to prevent use of the device.
Page 53: Led Indicators
Getting Started 2 - 9 Unlock Device Window Figure 2-14 Tap Unlock on the window. Unlock Device LED Indicators The MC909X has an LED Indicator Bar that contains LEDs that indicate scanning and charging status. Table 2-4 describes the LED indications. LED Indicator Bar MC909X LEDs Indicator Bar Figure 2-15...
Page 54: Keypads
The modular keypads can be changed in the field, as necessary, to support specialized applications. Refer to the MC909X Integrator Guide for installation and removal procedures. NOTE For information about using the soft keyboard input panel, refer to the Microsoft Application Guide for Symbol Devices.
Page 55: 28-Key Keypad For Mc909X-G/K
Getting Started 2 - 11 28-Key Keypad for MC909X-G/K The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Page 56: 28-Key Keypad For Mc909X-S
2 - 12 MC909X Mobile Computer User Guide 28-Key Keypad for MC909X-S The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Page 57 Getting Started 2 - 13 28-Key Descriptions Table 2-5 Description Power (red) Turns the mobile computer on and off. Performs a warm boot when held down for five seconds. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the...
Page 58 2 - 14 MC909X Mobile Computer User Guide 28-Key Descriptions (Continued) Table 2-5 Description Alphanumeric In default state, produces the numeric value on the key. In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence.
Page 59 Getting Started 2 - 15 28-Key Descriptions (Continued) Table 2-5 Description ENT (Enter) Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit. To make the applications work properly, create an XML Provisioning file with the following entries: Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”...
Page 60: 33-Key Numeric/Function Keypad For Mc909X-K
2 - 16 MC909X Mobile Computer User Guide 33-Key Numeric/Function Keypad for MC909X-K The 33-key numeric/function keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate alpha key (orange) values.
Page 61 Getting Started 2 - 17 33-Key Keypad Descriptions Table 2-6 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the...
Page 62 2 - 18 MC909X Mobile Computer User Guide 33-Key Keypad Descriptions (Continued) Table 2-6 Description Alphanumeric In default state, produces the numeric value on the key. In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence.
Page 63 Getting Started 2 - 19 33-Key Keypad Descriptions (Continued) Table 2-6 Description Period/Decimal Produces a decimal point for numeric entries. Produces a period for alpha entries when the Point ALPHA function key is activated. HOME Moves the cursor to the beginning of a line. ENTER Executes a selected item or function.
Page 64: 38-Key Numeric/Function Keypad For Mc909X-S
2 - 20 MC909X Mobile Computer User Guide 38-Key Numeric/Function Keypad for MC909X-S The 38-key numeric/function keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate alpha key (orange) values.
Page 65 Getting Started 2 - 21 38-Key Numeric/Function for MC909X-S Keypad Descriptions Table 2-7 Description Power (red) Turns the mobile computer on and off. Performs a warm boot when held down for 5 seconds. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the...
Page 66 2 - 22 MC909X Mobile Computer User Guide 38-Key Numeric/Function for MC909X-S Keypad Descriptions (Continued) Table 2-7 Description Alpha-lock (orange) Press and release the orange alpha-lock key to activate the keypad alternate alpha-lock functions (shown on the keypad in orange). The LED above the key lights and the icon appears at the bottom of the screen.
Page 67 Getting Started 2 - 23 38-Key Numeric/Function for MC909X-S Keypad Descriptions (Continued) Table 2-7 Description Period/Decimal Point In default state, produces a period for alpha entries and a decimal point for numeric entries. Use with the orange alpha-lock key for alpha character value. Star In default state, produces an asterisk.
Page 68: 38-Key Alpha/Shifted Numeric Keypad For Mc909X-S
2 - 24 MC909X Mobile Computer User Guide 38-Key Alpha/Shifted Numeric Keypad for MC909X-S The 38-key alpha/shifted numeric keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate numeric key (orange) values.
Page 69 Getting Started 2 - 25 38-Key Alpha/Shifted Numeric for MC909X-S Keypad Descriptions Table 2-8 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot.
Page 70 2 - 26 MC909X Mobile Computer User Guide 38-Key Alpha/Shifted Numeric for MC909X-S Keypad Descriptions (Continued) Table 2-8 Description Num-lock (orange) Press and release the orange num-lock key to activate the keypad alternate num-lock functions (shown on the keypad in orange). The LED above the key lights and the icon appears at the bottom of the screen.
Page 71: 43-Key Keypad For Mc909X-G/K
Getting Started 2 - 27 43-Key Keypad for MC909X-G/K The 43-key keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Page 72 2 - 28 MC909X Mobile Computer User Guide 43-Key Keypad Descriptions Table 2-9 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot.
Page 73 Getting Started 2 - 29 43-Key Keypad Descriptions (Continued) Table 2-9 Description Alpha/Application These keys can have an application assigned to the function value and have an alpha value assigned when used with the ALPHA function key. On Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level.
Page 74 2 - 30 MC909X Mobile Computer User Guide 43-Key Keypad Descriptions (Continued) Table 2-9 Description Period/Decimal Produces a period for alpha entries, a decimal point for numeric entries and the alphabetic Point character X when the ALPHA function key is activated. Star Produces an asterisk and the alphabetic character Z when the ALPHA function key is activated.
Page 75: 53-Key Keypad For Mc909X-G/K
Getting Started 2 - 31 53-Key Keypad for MC909X-G/K There are two physical configurations of the 53-key keypad, however both of the keypads are functionally identical. The 53-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values.
Page 76 2 - 32 MC909X Mobile Computer User Guide 53-Key Descriptions Table 2-10 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from...
Page 77 Getting Started 2 - 33 53-Key Descriptions (Continued) Table 2-10 Description Numeric/Application Numeric value keys - can have applications assigned with function key(s). For Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
Page 78: 3270 Emulator Keypad For Mc909X-G/K
2 - 34 MC909X Mobile Computer User Guide 3270 Emulator Keypad for MC909X-G/K There are two physical configurations of the 3270 emulator keypad, however both of the keypads are functionally identical. The 3270 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values.
Page 79 Getting Started 2 - 35 3270 Emulator Descriptions Table 2-11 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot. Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed.
Page 80 2 - 36 MC909X Mobile Computer User Guide 3270 Emulator Descriptions (Continued) Table 2-11 Description Application These keys can be assigned to an application. On Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
Page 81: 5250 Emulator Keypad For Mc909X-G/K
Getting Started 2 - 37 5250 Emulator Keypad for MC909X-G/K There are two physical configurations of the 5250 emulator keypad, however both of the keypads are functionally identical. The 5250 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values.
Page 82 2 - 38 MC909X Mobile Computer User Guide 5250 Emulator Descriptions Table 2-12 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot. Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed.
Page 83 Getting Started 2 - 39 5250 Emulator Descriptions (Continued) Table 2-12 Description Application These keys can be assigned to an application. On Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
Page 84: Vt Emulator Keypad
2 - 40 MC909X Mobile Computer User Guide VT Emulator Keypad The VT emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Page 85 Getting Started 2 - 41 VT Emulator Descriptions Table 2-13 Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-50 for information about performing a warm and cold boot. Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed.
Page 86 2 - 42 MC909X Mobile Computer User Guide VT Emulator Descriptions (Continued) Table 2-13 Description Application These keys can be assigned to an application. F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
Page 87: Keypad Special Functions
Getting Started 2 - 43 Keypad Special Functions The keypad special functions are color coded on the keypads. For example, on the 53-key keypad, the display backlight icon is blue indicating that the blue function key must be selected first to access the display backlight. On the 43-key keypad, the display backlight icon is white indicating that the display backlight is the default value for that key.
Page 88: Entering Data
2 - 44 MC909X Mobile Computer User Guide Entering Data When entering data on the keypad, use either the single-hand method or the two-hand method as shown in Figure 2-26. Two-hand Method Single-hand Method Entering Data on the Keypad Figure 2-26 Using the Power Button Press the red Power button to turn the mobile computer screen on and off (suspend mode).
Page 89: Using A Wired Headset
When a headset is plugged into the jack, the speakerphone is muted. For WWAN-enabled mobile computers, Symbol recommends a 2.5mm jack headset, p/n 50-11300-050. NOTE The MC9094 and MC9097 does not support headsets with buttons used to answer or hang-up a call. Use the green dot or red dot keys on the keypad.
Page 90: Using A Bluetooth Headset
2 - 46 MC909X Mobile Computer User Guide Using a Bluetooth Headset You can use a Bluetooth headset for audio communication when an audio enabled application is used. See Chapter 3, Using Bluetooth for information on connecting a Bluetooth device to the mobile computer. Ensure that the mobile computer’s volume is set appropriately before putting the headset on.
Page 91: Scanning Considerations
Practice quickly shows what tolerances to work within. NOTE Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless.
Page 92: Scanning Bar Codes
For mobile computers with an imager, place the bar code in any orientation within the aiming pattern. Ensure the entire symbol is within the rectangular area formed by the brackets in the aiming pattern. The red laser aiming pattern turns on to assist in aiming. If necessary, the mobile computer turns on its red LED to illuminate the target bar code.
Page 93: Scan Led Indicator
Getting Started 2 - 49 Release the trigger. NOTE Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled. Scanning Tips Optimal scanning distance varies with bar code density and scanner optics.
Page 94: Performing A Cold Boot
2 - 50 MC909X Mobile Computer User Guide Performing a Cold Boot A cold boot restarts the mobile computer and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm boot does not solve the problem.
Page 95: Waking The Mobile Computer
Getting Started 2 - 51 On an MC9090-G, while the battery is partially released, simultaneously press and release the trigger and the Power button. On an MC-909X-K or MC909X-S, while the battery is partially released, simultaneously press and release the left scan button and the Power button.
Page 96 2 - 52 MC909X Mobile Computer User Guide...
Page 97: Chapter 3 Using Bluetooth
Channel Maintenance - A method for periodically re-evaluating the channels. When AFH is enabled, the Bluetooth radio “hops-around” (instead of through) the 802.11b high-rate channels. AFH coexistence allows Symbol mobile computers to operate in any infrastructure. AFH is always enabled in the MC909X.
Page 98: Security
3 - 2 MC909X Mobile Computer User Guide The Bluetooth radio in this mobile computer operates as a Class 2 device power class. The maximum output power is 2.5mW and the expected range is up to 32.8 feet (10 meters). A definitive definition of ranges based on power class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space.
Page 99: Enabling Bluetooth
Using Bluetooth 3 - 3 Disable Bluetooth Figure 3-1 Enabling Bluetooth To enable Bluetooth, tap icon > . The icon changes to indicate that Bluetooth Bluetooth Enable Bluetooth Bluetooth is enabled. Enable Bluetooth Figure 3-2 Bluetooth Power States Cold Boot When a cold boot is performed on the mobile computer, Bluetooth turns off.
Page 100: Suspend
3 - 4 MC909X Mobile Computer User Guide Suspend When the mobile computer suspends, Bluetooth turns off. NOTE When the mobile computer is placed in suspend mode, the Bluetooth radio mode powers off and the piconet (Bluetooth connection) is dropped. When the mobile computer resumes, it could take up to 10 seconds for the Bluetooth radio driver to re-initialize the radio.
Page 101: Modes
Using Bluetooth 3 - 5 Modes The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users. Wizard Mode Wizard Mode provides a simple step by step process for discovering and connecting to Bluetooth devices.
Page 102 3 - 6 MC909X Mobile Computer User Guide Select Remote Device Window Figure 3-5 NOTE Devices discovered previously are listed to save time. To start a new device discovery, tap and hold and select Discover Devices from the menu. Select a device from the list and then tap .
Page 103: Explorer Mode
Using Bluetooth 3 - 7 Connection Summary Window Figure 3-7 to connect to the service. Connect The following actions are available in the drop-down list (actions may vary depending upon configurations): • Explore Services on Remote Device • Pair with a Remote Device •...
Page 104: Discovering Bluetooth Device(S)
3 - 8 MC909X Mobile Computer User Guide You can also use the “tap and hold” technique to view available options. Scroll bars and view options are like those you’re familiar with on your Windows desktop. The tree structure lists the following sub-items: •...
Page 105: Bonding With Discovered Device(S)
Using Bluetooth 3 - 9 Discover Devices Figure 3-10 The discovered devices display in the folder. Untrusted Devices Discovered Devices Listed in Untrusted Folder Figure 3-11 Bonding with Discovered Device(s) A bond is a relationship created between the mobile computer and another Bluetooth device in order to exchange information in a secure manner.
Page 106 3 - 10 MC909X Mobile Computer User Guide Pair a Remote Device Figure 3-12 Select from the pop-up menu. Pair On the mobile computer, the window appears. PIN Code Request PIN Code Request Window Figure 3-13 In the text box, enter the PIN number (between 1 and 16 characters) and then tap PIN Code: On the remote device, enter the same PIN number.
Page 107: Renaming A Bonded Device
Using Bluetooth 3 - 11 Renaming a Bonded Device If it is necessary to rename a bonded device, it can be done from the window. BTExplorer Launch BTExplorer Tap and hold the device to rename and select in the pop-up menu. Rename Rename Device Selection Dialog Box Figure 3-15...
Page 108: Accepting A Bond
3 - 12 MC909X Mobile Computer User Guide Delete a Bonded Device Figure 3-17 A confirmation dialog appears. Tap Accepting a Bond When a remote device wants to bond with a mobile computer you give permission by entering a PIN when requested.
Page 109: Discovering Services
Using Bluetooth 3 - 13 Discovering Services Before services can be used, you must first discover remote devices and then bond to those devices. To determine what services are available on a bonded remote device: Tap the icon and select Bluetooth Show BTExplorer window, tap and hold on the remote device and select...
Page 110: File Transfer Services
3 - 14 MC909X Mobile Computer User Guide File Transfer Services NOTE Shared folders are a security risk. To transfer files between the mobile computer and another Bluetooth enabled device: Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-22. Discover and bond (pair) with the remote access point.See Bonding with Discovered Device(s) on page 3-9.
Page 111: Delete File
Using Bluetooth 3 - 15 Delete File To delete a file from the remote device: Tap and hold on the file and select Delete In the dialog box tap Delete Remote Device File Get File To copy a file from a remote device: Tap and hold on the file and select .
Page 112 3 - 16 MC909X Mobile Computer User Guide Prior to creating a connection, ensure the following: • Bluetooth phone is turned on. • Bluetooth phone is discoverable. (Some phones may also need to be pairable in order to accept a bonding request.
Page 113: Add A Dial-Up Entry
Using Bluetooth 3 - 17 Network Log On Window Figure 3-23 In the text box, enter the user name for this connection. User name: In the text box, enter the password for this connection. Password: In the text box, enter the domain for this connection, if required. Domain: The phone begins dialing.
Page 114: Obex Object Push Services
3 - 18 MC909X Mobile Computer User Guide Add Phone Book Entry Figure 3-25 In the text box, enter a name for this connection. Name for the connection In the text box, enter the country code for the country that you are calling. Country Code In the text box, enter the area code.
Page 115: Headset Services
Using Bluetooth 3 - 19 Tap the remote device folder. Tap and hold on and select . The window appears. OBEX Object Push Connect OBEX Object Push OBEX Object Push Window Figure 3-26 In the drop-down list, select Action Send A Picture .
Page 116: Serial Port Services
3 - 20 MC909X Mobile Computer User Guide Discover and bond (pair) with the headset. , select the folder. BTExplorer Remote Devices Select the folder. Trusted Devices Tap the remote device folder. Tap and hold on the remote device and select .
Page 117: Personal Area Network Services
Using Bluetooth 3 - 21 Remote Service Connection Window Figure 3-28 In the drop-down list select a COM port. Local COM Port Personal Area Network Services Connect two or more Bluetooth devices to share files, collaborate or play multi player games. To establish a Personal Area Network connection: Ensure the mobile computer is discoverable and connectable.
Page 118: Bluetooth Settings
3 - 22 MC909X Mobile Computer User Guide Bluetooth Settings Use the window to configure the operation of the application. Tap > BTExplorer Settings BTExplorer Tools Settings window appears. BTExplorer Settings Device Info Tab Use the tab to configure the mobile computer’s Bluetooth connection modes. Device Info BTExplorer Settings - Device Info Tab Figure 3-29...
Page 119: Dial-Up Networking Service
Using Bluetooth 3 - 23 BTExplorer Settings - Services Tab Figure 3-30 To add a service: . The window displays. Add Local Service Add Local Service Window Figure 3-31 In the list, select a service to add. . The window displays for the selected service. Edit Local Service Select the appropriate information and then tap .
Page 120: File Transfer Service
3 - 24 MC909X Mobile Computer User Guide Add Local Service Window Figure 3-32 Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Local COM Port Select the COM port.
Page 121: Obex Object Push Service
Using Bluetooth 3 - 25 Root Directory Select the directory that other Bluetooth devices can access. File Permissions Select the file permissions for the selected directory. Check the appropriate box to grant Read access, write access and delete access. OBEX Object Push Service OBEX Object Push allows contacts, business cards, pictures, appointments, and tasks to be pushed to the device by other Bluetooth devices.
Page 122: Serial Port Service
3 - 26 MC909X Mobile Computer User Guide Personal Area Networking Window Figure 3-35 Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None Authenticate Authenticate/Encrypt Support Group Ad-Hoc Select to enable Ad-Hoc networking. Networking Serial Port Service Serial port allows COM ports to be accessed by other Bluetooth devices.
Page 123: Headset Service
Using Bluetooth 3 - 27 Headset Service NOTE Not available on MC9090-G with Windows CE 5.0. Serial port allows COM ports to be accessed by other Bluetooth devices. Headset Service Window Figure 3-37 Service Name Displays the name of the service. IrMC Synchronization Service NOTE This service is only available on WWAN configurations with OEM version 01.39.0001 and higher.
Page 124: Security Tab
3 - 28 MC909X Mobile Computer User Guide Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list. Options are None , or Authenticate Authenticate/Encrypt Phonebook Select the checkbox to allow synchronization with the EDA’s Phonebook contacts.
Page 125: Virtual Com Port Tab
Using Bluetooth 3 - 29 BTExplorer Settings - Discovery Tab Figure 3-40 Inquiry Length Sets the amount of time that the mobile computer takes to discover Bluetooth devices in the area. Name Discovery Mode Select either Automatic manual Discovered Devices Deletes all discovered devices and link keys.
Page 126: Miscellaneous Tab
3 - 30 MC909X Mobile Computer User Guide COM Port Connection Figure 3-42 Miscellaneous Tab BTExplorer Settings - Miscellaneous Tab Figure 3-43 Highlight Connections Select the connection type to highlight when connected. In the Wizard Mode, the only option is .
Page 127: Chapter 4 Using Mc9094 Phone
Chapter 4 Using MC9094 Phone Introduction Use the MC9094 phone to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
Page 128: Making A Call Using The Keypad
4 - 2 MC909X Mobile Computer User Guide To receive calls when the mobile computer is suspended, leave the phone radio turned on and ensure the mobile computer is set to wake with any key. Making a Call Using the Keypad Phone calls can be dialed from the phone keypad, using speed dial or from call history.
Page 129: Audio Modes
Using MC9094 Phone 4 - 3 Incoming Call Figure 4-3 To ignore the incoming the call tap . This may send the caller to voice mail, depending on the service Ignore provider. To end the call tap or press the red dot key on the mobile computer keypad. Audio Modes The mobile computer offers two audio modes to use during phone calls: •...
Page 130: Muting A Call
4 - 4 MC909X Mobile Computer User Guide Muting a Call During a call, you can mute the microphone so that the person on the line can be heard but cannot hear conversation from the microphone. This is useful when there is conversation or background noise on the user’s end.
Page 131: Using Speed Dial
Using MC9094 Phone 4 - 5 Note icon Call History - Notes Menu Figure 4-6 Select View Note Call History - Notes Figure 4-7 to exit. NOTE Notes can also be accessed directly from the Notes application by tapping Start > Notes. Using Speed Dial Create speed dial numbers to dial frequently called numbers with a single tap.
Page 132 4 - 6 MC909X Mobile Computer User Guide Contacts Figure 4-8 Tap the desired contact name and number in the list. Speed Dial Contact Location Figure 4-9 In the field, tap the Up/Down arrows to select an available location to assign as the new speed dial Location entry.
Page 133 Using MC9094 Phone 4 - 7 To add a speed dial entry from the window: Contacts > Start Contacts Contacts Figure 4-11 Tap and hold the contact name. Contacts Menu Figure 4-12 Add to Speed Dial Speed Dial Contact Location Figure 4-13...
Page 134: Editing A Speed Dial Entry
4 - 8 MC909X Mobile Computer User Guide Tap the Up/Down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. Editing a Speed Dial Entry >...
Page 135: Making A Speed Dial Call
Using MC9094 Phone 4 - 9 Speed Dial Tap and hold the contact name. Speed Dial Delete Menu Figure 4-16 Delete Tap Yes to confirm permanently deleting the speed dial entry. NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts (Start >...
Page 136: Using Call History
4 - 10 MC909X Mobile Computer User Guide Using Call History Use Call History to call someone who was recently called, or recently called in. Call History provides the time and duration of all incoming, outgoing and missed calls. It also provides a summary of total calls and easy access to notes taken during a call.
Page 137: Resetting The Recent Calls Counter
Using MC9094 Phone 4 - 11 > to show the menu. Menu Filter Call History - All Calls/Show Menu Figure 4-19 Select a view type from the menu to display only missed calls, outgoing calls, incoming calls or calls listed alphabetically by caller name.
Page 138: Deleting Call History Items By Call Date
4 - 12 MC909X Mobile Computer User Guide Call History - Call Timers Figure 4-21 . (The counter cannot be reset.) Reset All Calls: to exit the window. Call Timers Deleting Call History Items by Call Date > or press the green dot key on the mobile computer’s keypad to display the Phone keypad. Start Phone From the Phone keypad, tap...
Page 139: Viewing Call Status
Using MC9094 Phone 4 - 13 Call History - Tools Menu Figure 4-23 Select Delete all calls Call History - Delete All Dialog Figure 4-24 to exit the window. Call History Viewing Call Status > or press the green dot key on the mobile computer’s keypad to display the Phone keypad. Start Phone From the Phone keypad, tap...
Page 140: Using The Call History Menu
4 - 14 MC909X Mobile Computer User Guide to exit. Using the Call History Menu Use the Call History menu to dial voice mail, access the Activation Wizard, save to contacts, view a note, delete a listing, send an SMS and make a call. >...
Page 141: Swapping Calls
Using MC9094 Phone 4 - 15 Contacts Menu Figure 4-27 Call Work NOTE To make a call from an open contact, tap the number to call. See On-Device Help for more information about Contacts. Swapping Calls To move between two or more phone calls: Tap Start - Phone or press the green phone key on the mobile computer’s keypad to display the Phone keypad.
Page 142: Conference Calling
4 - 16 MC909X Mobile Computer User Guide Call Conferencing - Conferencing Figure 4-29 Tap Swap to move from one call to the other. Tap End or press the red phone key on the mobile computer keypad to end each call. Conference Calling To create a conference phone session with two or more people and the initiator: >...
Page 143: Text Messaging
Using MC9094 Phone 4 - 17 Creating a Conference Call Figure 4-31 Tap End or press the red phone key on the mobile computer keypad to end the conference call. NOTE To speak privately with one party during a conference call, tap Menu > Private. To include all parties again, tap Menu >...
Page 144: Establishing A Data Connection
4 - 18 MC909X Mobile Computer User Guide Tools Menu Figure 4-32 On the Text Messages window, enter your message. Address Area Message Area Send Button Text Messages Window Figure 4-33 Tap Send to send the message. Establishing a Data Connection To make a data connection: Ensure a SIM card is installed in the mobile computer.
Page 145 Using MC9094 Phone 4 - 19 Connectivity Dialog Figure 4-34 Settings Managing existing connections Tap and hold on the data connection until a menu appears. Data Connection Figure 4-35 Select Connect Connecting Using GPRS Packet Data Modem Figure 4-36...
Page 146: Ending An Gprs Data Connection
4 - 20 MC909X Mobile Computer User Guide If the SIM card is protected with a Personal Identification Number (PIN), a dialog box pops up requesting the appropriate PIN to unlock the SIM card. In this case, enter the PIN and tap NOTE Emergency calls can be placed at any time, without requiring a PIN or a SIM card.
Page 147: Chapter 5 Using The Mc9097 Phone
Chapter 5 Using the MC9097 Phone Introduction Use the MC9097 phone to make phone and walkie-talkie calls, set up speed dials and keep track of calls. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
Page 148 5 - 2 MC909X Mobile Computer User Guide MC9097 Phone Window - Phone Tab Figure 5-1 The phone number is listed at the top of the window after the first call is received. To find your walkie-talkie number: > > tab >...
Page 149: Accessing The Phone Keypad
Using the MC9097 Phone 5 - 3 Accessing the Phone Keypad The keypad can be accessed regardless of the program in use on the mobile computer. Applications on the mobile computer can be in use during a call. Antenna/Signal MC9097 Phone Keypads Figure 5-3 To access the phone keypad tap >...
Page 150: With Aku 2.2 And Higher
5 - 4 MC909X Mobile Computer User Guide Connectivity Dialog Box Figure 5-4 to turn the phone off. The phone takes approximately two to five seconds to shut the Turn on flight mode radio off. NOTE When turning flight mode on the Bluetooth radio is also turned off. To turn the phone on: at the top of the screen to display the dialog box.
Page 151 Using the MC9097 Phone 5 - 5 To open , tap the icon. Wireless Manager Connectivity Opening Wireless Manager Figure 5-6 Select . The window appears. Wireless Manager Wireless Manager Wireless Manager Figure 5-7 To toggle the phone on or off, tap blue bar.
Page 152: Using The Speakerphone And A Headset
5 - 6 MC909X Mobile Computer User Guide Using the Speakerphone and a Headset You can use the MC9097 with the built-in speakerphone, with a wired headset or a Bluetooth headset. The MC9097 defaults to speakerphone mode. When a wired headset is plugged into the MC9097 audio connector or a Bluetooth headset is configured for use with the MC9097, the speakerphone is muted and audio is heard through the headset.
Page 153: Making A Phone Call
Using the MC9097 Phone 5 - 7 Making a Phone Call You may access the phone keypad from any application on your mobile computer. You may also access other applications on the mobile computer while you are on a call. When dialing numbers on the mobile computer, use either the stylus to tap numbers on the phone keypad, or use the keypad, located on the bottom half of the device.
Page 154: Making Calls From Recent Call List
5 - 8 MC909X Mobile Computer User Guide Contact Information Figure 5-10 Select the number to call (i.e., the contact’s mobile or home number). . The mobile computer places the phone call. Call to terminate the phone call. Making Calls from Recent Call List You may access the list to make calls.
Page 155: Receiving Phone Calls
Using the MC9097 Phone 5 - 9 Receiving Phone Calls A dialog box appears on the mobile computer’s display window when an incoming call is received. If the phone is set to ring, a ring tone sounds. The user has the option to answer the incoming call or ignore the call. You may choose to answer or ignore any incoming phone calls.
Page 156: Walkie-Talkie Calls
5 - 10 MC909X Mobile Computer User Guide Walkie-Talkie Calls Use the mobile computer to make walkie-talkie phone calls to other network subscribers. Every walkie-talkie number has 3 parts - an area ID, a network ID, and a member ID. An asterisk separates each part of the walkie-talkie number.
Page 157: Sending Call Alerts
Using the MC9097 Phone 5 - 11 Sending Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a walkie-talkie call. When you send a call alert, the recipient’s phone emits a series of beeps or vibrations. The phone displays your name or walkie-talkie number.
Page 158: Making Walkie-Talkie Calls
5 - 12 MC909X Mobile Computer User Guide Making Walkie-Talkie Calls To make a walkie-talkie call: > or press the green dot key on the mobile computer’s keypad. Start Phone Phone Keypad Figure 5-17 Enter the walkie-talkie number to call. Press and hold the black walkie-talkie button, located on the left side of the mobile computer.
Page 159: Receiving Call Alerts
Using the MC9097 Phone 5 - 13 , at the bottom of the window. The window appears. Contacts Contacts NOTE To add a walkie-talkie number to the Contact list, enter the number in the Radio tel: field in the Contact window.
Page 160: Receiving Walkie-Talkie Calls
5 - 14 MC909X Mobile Computer User Guide NOTE You may also go to the Call History window and clear the call alert there. The call alerts appear as walkie-talkie calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list.
Page 161: Establishing A Data Packet Connection
Using the MC9097 Phone 5 - 15 Establishing a Data Packet Connection The iDEN Data Packet settings are pre-configured on the device. Ensure that data packet service is available from your service provider. With a data packet connection you can connect to the internet or transfer data using an application.
Page 162: Phone Options
5 - 16 MC909X Mobile Computer User Guide Disconnecting a Data Connection Figure 5-22 Disconnect Phone Options Creating Notes Notes can be taken during a call from any window within the Phone application. You can even take notes when you are on another call.
Page 163 Using the MC9097 Phone 5 - 17 . The window appears with information on the last number you dialed. Menu > Create Note Notes Type your notes. . The phone application saves the note with the call history for that particular call. To access a note created during a call: >...
Page 164: Muting A Call
5 - 18 MC909X Mobile Computer User Guide Muting a Call During a call, the microphone can be muted so that the person on the line can be heard but cannot hear conversation from the microphone. This is useful if the user is listening to the person on the line and there’s conversation or background noise on the user’s end.
Page 165: Add A Speed Dial Entry
Using the MC9097 Phone 5 - 19 . A list of speed dial numbers appears. Speed Dial Speed Dial Location Number Speed Dial List Figure 5-27 Tap the entry number for the speed dial number. The phone makes the call. To stop dialing or end the call, tap or press the red dot key on the mobile computer keypad.
Page 166: Create A New Speed Dial Entry
5 - 20 MC909X Mobile Computer User Guide Speed Dial Contact Location Figure 5-29 Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voicemail. .
Page 167: Delete A Speed Dial Entry
Using the MC9097 Phone 5 - 21 Edit the contact. . The contact information saves. Delete a Speed Dial Entry To delete a speed dial entry: NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts. .
Page 168: Viewing Call History
5 - 22 MC909X Mobile Computer User Guide to see the phone number of the person whose call you missed. View Tap the number again to immediately call the person back. Viewing Call History Use Call History to call someone who was recently called, or recently called in. Call History provides the time and duration of all incoming, outgoing and missed calls.
Page 169: Viewing Call Status
Using the MC9097 Phone 5 - 23 Select the call type you want to view (i.e., Outgoing). The log for all calls of the selected type Call History appears. Viewing Call Status To view call status: . A log of incoming, outgoing, walkie-talkie, and call alert calls appears. Call History Tap the contact with the status you want to view.
Page 170: Deleting Calls Based On Length Of Time
5 - 24 MC909X Mobile Computer User Guide Call History - Delete All Dialog Figure 5-36 . The mobile computer deletes the entire call history log. Deleting Calls Based on Length of Time To delete calls based on length of time in Call History log: .
Page 171: Using Call Timers
Using the MC9097 Phone 5 - 25 Delete Call from Call History Figure 5-38 Tap and hold the phone number one more time and select from the pop-up menu. A dialog box appears Delete with the message Permanently Delete this Call? .
Page 172 5 - 26 MC909X Mobile Computer User Guide...
Page 173: Chapter 6 Accessories
Chapter 6 Accessories Introduction The MC909X accessories provide a variety of product support capabilities. Accessories include cradles, cables and charges. Keypads Optional keypads include the interchangeable modular application specific keypads. The modular keypads can be changed in the field as necessary to support specialized applications. Cradles •...
Page 174: Keypads
6 - 2 MC909X Mobile Computer User Guide Keypads The mobile computer has interchangeable modular keypads. The modular keypads can be changed in the field as necessary to support specialized applications. Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with CAUTION the keypad detached.
Page 175: Multi Media Card (Mmc) / Secure Device (Sd) Card
Accessories 6 - 3 Installing the Keypad Figure 6-2 Perform a warm boot. Multi Media Card (MMC) / Secure Device (SD) Card The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see Figure 6-1 on page 6-2).
Page 176 6 - 4 MC909X Mobile Computer User Guide MMC/SD MMC/SD Retaining Door Inserting the MMC/SD Figure 6-3 CAUTION Do not apply more than 4 in-lbs of torque when tightening the keypad screws. Replace the keypad and re-attach using the two screws (see Figure 6-2 on page 6-3).
Page 177: Single Slot Serial/Usb Cradle
Accessories 6 - 5 Single Slot Serial/USB Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. This section describes how to use a single Single Slot Serial/USB cradle (Figure 6-4) with the mobile computer. For serial and USB communication setup procedures refer to the MC909X Integrator Guide.
Page 178: Battery Charging Indicators
MC909X-S Spare Battery Charging Figure 6-5 CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 179: Four Slot Ethernet Cradle
Accessories 6 - 7 The amber spare battery charging LED on the cradle (see Figure 6-4 on page 6-5) shows the status of the spare battery charging in the cradle. See Table 6-2 for charging status indications. Batteries usually charge in less than four hours. Spare Battery LED Charging Indicators Table 6-1 Spare Battery LED...
Page 180: Battery Charging Indicators
Do not place coins, keys or paper clips in cradle well. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 181: Four Slot Charge Only Cradle
Do not place coins, keys or paper clips in cradle well. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 182: Battery Charging Indicators
Four Slot Spare Battery Charger Figure 6-8 CAUTION Use only a Symbol approved power supply output rated 15 VDC and minimum 5 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 183: Magnetic Stripe Reader
Magnetic Stripe Reader Figure 6-9 CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 184: Attaching And Removing
6 - 12 MC909X Mobile Computer User Guide NOTE When a mobile computer with Windows Mobile 5.0 is connected to a host computer through the MSR and an ActiveSync connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a Microsoft security feature to prevent connection to two networks at the same time.
Page 185: Setup
Accessories 6 - 13 Setup Into Cigarette Lighter AC Power Vehicle Power Supply Supply MSR Power Connection Figure 6-11 Serial Port To Device Serial/USB Port MSR Serial/USB Connection Figure 6-12 Battery Charging Indicators To charge the mobile computer’s battery through the MSR, connect the power supply to the MSR (see Figure 6-11 on page 6-13), then attach the MSR to the mobile computer.
Page 186: Using The Msr
6 - 14 MC909X Mobile Computer User Guide To connect the MSR to a serial/USB device, connect one end of the serial device cable into the serial port on the MSR and the other end into the serial/USB port on the device. Using the MSR The MSR9000 sample application is designed to work with the MSR.
Page 187: Cable Adapter Module
Cable Adapter Module Figure 6-14 CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 188: Setup
6 - 16 MC909X Mobile Computer User Guide Attaching the CAM (MC909X-G shown) Figure 6-15 To remove, squeeze the latch grips and pull the CAM from the mobile computer. NOTE Remove the CAM from the bottom of the mobile computer before using a cradle for charging and communication.
Page 189: Battery Charging Indicators
Accessories 6 - 17 Serial Port To Device Serial/USB Port CAM Serial Connection Figure 6-17 Battery Charging Indicators To charge the mobile computer’s battery through the CAM, connect the power supply to the CAM (see Figure 6-16 on page 6-16), then attach the CAM to the mobile computer. The mobile computer begins charging automatically. NOTE Batteries must be charged within the 32°...
Page 190: Universal Battery Charger (Ubc) Adapter
To remove the battery, press the battery release and lift battery out of the well. CAUTION Use only a Symbol approved power supply output rated 15 VDC and minimum 1.5 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Page 191 Accessories 6 - 19 The battery usually charges in three hours. POWER READY or STANDBY or FAULT (Green) (Flashing Yellow) (Solid Yellow) CHARGING (Solid Yellow) UBC Adapter LEDs Figure 6-19 UBC Adapter Charge LED Status Indications Table 6-3 Indication Description POWER Green Power is connected to the UBC Adapter.
Page 192: Modem Module
The following items are required for communication: • MC9090-G Series mobile computer • Cable Adapter Module (CAM), Symbol p/n ADP9000-100 (see Cable Adapter Module on page 6-15) • Serial Adapter Cable (for communication via cradle), Symbol p/n 25-63856-01 • Microsoft ActiveSync •...
Page 193: Setup
Accessories 6 - 21 Setup Connecting to the Mobile Computer Male 15-pin connector Phone port Line In port Phone cord Phone cord Modem Module Connection - Mobile Computer Figure 6-21 CAUTION Do not connect the modem's 15-pin connector into a VGA port of a host computer. Using the Correct Telephone Line Type Use a standard analog phone line, as in most households.
Page 194: Connecting To The Single Slot Serial/Usb Cradle
6 - 22 MC909X Mobile Computer User Guide Connecting to the Single Slot Serial/USB Cradle Adapter cable Male 15-pin connector Line In port Phone port Phone cord Modem Module Connection - Single Slot Serial/USB Cradle Figure 6-22 Do not connect the modem's 15-pin connector into a VGA port of a host computer. CAUTION NOTE If using a phone, connect the cord from the phone to the Phone port on the modem.
Page 195: Chapter 7 Maintenance & Troubleshooting
Chapter 7 Maintenance & Troubleshooting Introduction This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operation. Maintaining the Mobile Computer For trouble-free service, observe the following tips when using the mobile computer: •...
Page 196 7 - 2 MC909X Mobile Computer User Guide • Do not crush, puncture, or place a high degree of pressure on the battery. • Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.
Page 197: Troubleshooting
Maintenance & Troubleshooting 7 - 3 Troubleshooting Mobile Computer Troubleshooting the Mobile Computer Table 7-1 Problem Cause Solution Mobile computer does Lithium-ion battery Charge or replace the lithium-ion battery in the mobile computer. not turn on. not charged. Lithium-ion battery Ensure battery is installed properly.
Page 198 7 - 4 MC909X Mobile Computer User Guide Troubleshooting the Mobile Computer (Continued) Table 7-1 Problem Cause Solution Mobile computer turns Mobile computer is The mobile computer turns off after a period of inactivity. If the itself off. inactive. mobile computer is running on battery power, this period can be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes.
Page 199: Bluetooth Connection
Verify that the unit is loaded with a scanning application. See the does not accept scan is not loaded. System Administrator. input. Unreadable bar Ensure the symbol is not defaced. code. Distance between Ensure mobile computer is within proper scanning range. exit window and bar code is incorrect.
Page 200: Four Slot Charge Only Cradle
7 - 6 MC909X Mobile Computer User Guide Troubleshooting Bluetooth Connection (Continued) Table 7-2 Problem Cause Solution Mobile computer The mobile computer’s Recharge the battery. keeps powering battery is low. down to protect memory contents. When trying to The phone remembers the Manually delete the pairing device and name from the phone.
Page 201: Four Slot Ethernet Cradle
Maintenance & Troubleshooting 7 - 7 Four Slot Ethernet Cradle Troubleshooting the Four Slot Ethernet Cradle Table 7-4 Symptom Cause Solution Attempt by the mobile Mobile computer Wait one minute and reinsert the mobile computer in the cradle. computer to removed from the This allows the cradle to attempt another synchronization.
Page 202 7 - 8 MC909X Mobile Computer User Guide Troubleshooting the Four Slot Ethernet Cradle (Continued) Table 7-4 Symptom Cause Solution Mobile computer has Data is being Temporarily disable the radio link to force data transmission successfully transferred over the through the cradle. Tap the wireless LAN icon from the systray. connected through the S24 radio link.
Page 203 Maintenance & Troubleshooting 7 - 9 Troubleshooting the Four Slot Ethernet Cradle (Continued) Table 7-4 Symptom Cause Solution Battery is not Mobile computer Replace the mobile computer into the cradle. It can take up to four recharging. removed from the hours to recharge a completely depleted battery pack if mobile cradle too soon.
Page 204: Single Slot Serial/Usb Cradle
7 - 10 MC909X Mobile Computer User Guide Single Slot Serial/USB Cradle Troubleshooting the Single Slot Serial/USB Cradle Table 7-6 Symptom Possible Cause Solution LEDs do not light Cradle is not receiving Ensure the power cable is connected securely to both the cradle and when mobile power.
Page 205: Cable Adapter Module
Maintenance & Troubleshooting 7 - 11 Cable Adapter Module Troubleshooting The Cable Adapter Module Table 7-7 Symptom Possible Cause Solution Mobile computer Mobile computer was Ensure CAM is receiving power. Ensure mobile computer is battery is not removed from CAM or attached correctly.
Page 206 7 - 12 MC909X Mobile Computer User Guide Troubleshooting the Magnetic Stripe Reader (Continued) Table 7-8 Symptom Possible Cause Solution Mobile computer Mobile computer was Ensure MSR is receiving power. Ensure mobile computer is battery is not removed from MSR or attached correctly.
Page 207: Modem Module
Maintenance & Troubleshooting 7 - 13 Modem Module Troubleshooting the Modem Module Table 7-9 Symptom Possible Cause Solution Mobile The modem cable is not Connect the modem cable securely to both the modem and the computer is not fully connected. telephone jack.
Page 208 7 - 14 MC909X Mobile Computer User Guide Troubleshooting the Modem Module (Continued) Table 7-9 Symptom Possible Cause Solution Dial-out fails Location setting is Verify Dialing Locations. Verify Dialing Patterns are correct for the incorrect. current location. For example, enter ‘G’ in the For local calls, dial: field to dial directly, or ‘9,G’...
Page 209: Appendix A Specifications
Appendix A Specifications Technical Specifications The following tables summarize the mobile computer’s intended operating environment and general technical hardware specifications. Mobile Computer The following table summarizes the mobile computer’s intended operating environment. Technical Specifications Table A-1 Item MC909X-G MC909X-K MC909X-S Physical and Environmental Characteristics Dimensions 9.1 in.
Page 210 (RAM/ROM) Windows Mobile: 64MB/128MB Expansion SD/MMC Card Application PSDK, DCP and SMDK SMDK available through Symbol Developer Zone Web Site Development available through Symbol Developer Zone Web Site Data Capture 1D Standard Range scan 1D Standard Range scan engine Options...
Page 211 MC909X-G MC909X-K MC909X-S WLAN Wireless Data Communications WLAN radio Symbol 802.11a/b/g Operating Channel 8 - 169 (5040 - 5845 MHz) (4920 - 4980 MHz) Japan only Channels Channel 1 - 13 (2412 - 2472 MHz) Channel 14 (2484 MHz) Japan only...
Page 212 A - 4 MC909X Mobile Computer User Guide Technical Specifications (Continued) Table A-1 Item MC909X-G MC909X-K MC909X-S Wireless WAN (WWAN) Data Communications EDGE/GPRS General features: Radio Module • Quad-Band GSM 850/900/1800/1900 MHz • EDGE Multislot class 10 GPRS Multislot class 12 •...
Page 213 MC909X-K MC909X-S Peripherals and Accessories Cradles Single-slot and 4-slot cradles available Printers Supports extensive line of Symbol approved printers, cables and accessories Charger 4-Slot universal battery charger Other Cable Adapter Module; Magnetic Stripe Reader; Modem; Full set of holsters Accessories...
Page 214: Modem Module
A - 6 MC909X Mobile Computer User Guide Data Capture Options Table A-2 Item Description Laser Decode Capability Code 39 Code 128 Code 93 Codabar Code 11 Discrete 2 of 5 Interleaved 2 of 5 EAN-8 EAN-13 UPCA UPCE UPC/EAN supplementals Coupon Code Trioptic 39 Webcode...
Page 215 Specifications A - 7 Environmental Parameters and Technical Hardware Specifications (Continued) Table A-3 Item Description Line requirements Public switched telephone network (PSTN) including international connections Operating environment Altitude: up to 20,000 ft. Humidity: 10% to 90% non-condensing Operating temperature Operating: 32 to 122 F / 0 to 50...
Page 216: Mobile Computer Pin-Outs
A - 8 MC909X Mobile Computer User Guide Mobile Computer Pin-Outs Pin Locations Figure A-1 Pin-Outs Table A-4 PIN Number Signal Name Function USB_GND USB_D_PLUS RS232C RS232C RS232C RS232C RS232C Ground, 2.5A max. RS232C CRADLE_DET Grounded by cradle when in cradle RS232C Not connected Not connected...
Page 217: Accessory Cam And Msr Pin-Outs
Specifications A - 9 Accessory CAM and MSR Pin-Outs CAM and MSR Serial Connector Figure A-2 CAM and MSR Serial Connector Pin-outs Table A-5 Signal USB_5V_DET USB_D_MINUS USB_D_PLUS PWR_EXT_OUT CRADLE_DET*...
Page 218: Non-Incendive Devices
A - 10 MC909X Mobile Computer User Guide Non-Incendive Devices Hazardous (Classified) Location Class I, Division 2, Groups A, B, C & D Pin 17 to Pin 8 Pins 3, 6, or 10 to Pin 8 Pin 17 to Pin 8 Pins 3, 6, or 10 to Pin 8 Vmax = 3.37 VDC Vmax =5.6 VDC...
Page 219: Appendix B Keypad Special Keys
Appendix B Keypad Special Keys Introduction This appendix contains the keypad functions/special characters for the keypads. Each function/special character is included in the table along with how the function/special character is generated. Keypads The mobile computer is available with one of the following keypads: •...
Page 220 B - 2 MC909X Mobile Computer User Guide Special Character Generation Map (Continued) Table B-1 38-Key Special 28-Key 33-Key 38-Key Alpha 43-Key Numeric 53-Key Keypad Character Keypad Keypad Keypad Keypad Keypad Blue Key - (Backslash) Blue Key - Blue Key - Blue Key - Orange Key - Blue Key -...
Page 221 Keypad Special Keys B - 3 Special Character Generation Map (Continued) Table B-1 38-Key Special 28-Key 33-Key 38-Key Alpha 43-Key Numeric 53-Key Keypad Character Keypad Keypad Keypad Keypad Keypad “ SHIFT - Blue Key (double quote) SHIFT Blue Key - - Blue Blue Key - Orange Key -...
Page 222 B - 4 MC909X Mobile Computer User Guide...
Page 223: Appendix C Regulatory
Accessory Power Supplies Regulatory Compliance Statements Single Slot Serial/USB Cradle Use only a Symbol-approved power supply output rated 12 VDC and minimum Power Supply 3.3 A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and Magnetic Stripe Reader (MSR) may be dangerous.
Page 224 Accessory Power Supplies Regulatory Compliance Statements Universal Battery Charger (UBC) Use only a Symbol-approved power supply output rated 15 VDC and minimum Adapter Power Supply 1.5 A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous.
Page 225: Glossary
Glossary Numeric 802.11. A group of wireless specifications developed by the Institute of Electrical and Electronics Engineers (IEEE). It specifies an over-the-air interface between a wireless client and a base station or between two wireless clients. 802.11a. Operates in the 5 GHz frequency range (5.125 to 5.85 GHz) with a maximum 54Mbit/sec. signaling rate. The 5 GHz frequency band is not as crowded as the 2.4 GHz frequency because it offers significantly more radio channels than the 802.11b and is used by fewer applications.
Page 226 Bar Code Density. The number of characters represented per unit of measurement (e.g., characters per inch). Bar Height. The dimension of a bar measured perpendicular to the bar width. Bar Width. Thickness of a bar measured from the edge closest to the symbol start character to the trailing edge of the same bar.
Page 227 Character Set. Those characters available for encoding in a particular bar code symbology. Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies.
Page 228 COM port. Communication port; ports are identified by number, e.g., COM1, COM2. Continuous Code. A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater information density.
Page 229 Glossary - 5 EAN. (European Article Number) This European/International version of the UPC provides its own coding format and symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail. EAP. (Extensible Authentication Protocol) A general authentication protocol used to control network access. Many specific authentication methods work within this framework.
Page 230 Glossary - 6 MC909X Mobile Computer User Guide use simple mathematical calculations to broadcast information that is translated as longitude, latitude and altitude by Earth-based receivers. GPRS. (General Packet Radio Service) A technology that runs at speeds up to 115Kbit/sec., compared with the 9.6Kbit/sec. of older GSM systems.
Page 231 Glossary - 7 group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. Internet Protocol Address. See IP. I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal characteristics, and signal meanings.
Page 232 Mobile Computer. In this text, mobile computer refers to the Symbol Series 9090 wireless portable computer. It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless radio technology.
Page 233 Print Contrast Signal (PCS). Measurement of the contrast (brightness difference) between the bars and spaces of a symbol. A minimum PCS value is needed for a bar code symbol to be scannable. PCS = (RL - RD) / RL, where RL is the reflectance factor of the background and RD the reflectance factor of the dark bars.
Page 234 Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1. Light source (laser or photoelectric cell) - illuminates a bar code.
Page 235 Symbol Aspect Ratio. The ratio of symbol height to symbol width. Symbol Height. The distance between the outside edges of the quiet zones of the first row and the last row. Symbol Length. Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start character to the end of the quiet zone (margin) adjacent to a stop character.
Page 236 Glossary - 12 MC909X Mobile Computer User Guide world, hence its use in the worldwide Internet. Every client and server in a TCP/IP network requires an IP address, which is either permanently assigned or dynamically assigned at startup. Telnet. A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a user at a terminal or computer to log onto a remote device and run a program.
Page 237 Glossary - 13 Warm Boot. A warm boot restarts the mobile computer by closing all running programs. All data that is not saved to flash memory is lost. WAP. (Wireless Application Protocol) A set of specifications, developed by the WAP Forum, that lets developers using Wireless Markup Language build networked applications designed for handheld wireless devices.
Page 238 Glossary - 14 MC909X Mobile Computer User Guide...
Page 239 Index Numerics power connection ....6-16 serial connection ....6-13, 6-17 1-D bar codes .
Page 240 Index - 2 MC909X Mobile Computer User Guide backlight intensity ......2-43 charging spare batteries ..... . 1-8 backup battery .
Page 241 Index - 3 display backlight intensity ....2-43 phone edition ......2-4 display contrast .
Page 242 Index - 4 MC909X Mobile Computer User Guide headset mode ......4-3 keypad ......4-1, 5-3 laser safety .
Page 243 See SMDK ......1-5 Symbol Mobility Developer Kit for eVC4 ... .xi taskbar .
Page 244 Index - 6 MC909X Mobile Computer User Guide...
Page 246 1-800-927-9626 http://www.symbol.com MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc. 2007...

This manual is also suitable for:

Mc9090k Mc909x

Symbol MC9090G User Manual

About this Guide

Chapter 1 Getting Started

Chapter 2 Operating the MC909X

Chapter 3 Using Bluetooth

Chapter 4 Using MC9094 Phone

Chapter 5 Using the MC9097 Phone

Chapter 6 Accessories

Chapter 7 Maintenance & Troubleshooting

Appendix A Specifications

Appendix B Keypad Special Keys

Appendix C Regulatory

Glossary

Quick Links

Troubleshooting

Related Manuals for Symbol MC9090G

Summary of Contents for Symbol MC9090G