Symbol MC909X Integrator Manual page 209

IPL Errors
Table 7-4
Error Text
Unknown error
Cancelled by user
Can't open the source
Can't open the
destination
Can't read from the
source device
Can't write to the
destination device
Transmission checksum
error
Readback checksum
error
There is no more heap
space available
Insufficient data
available to complete
record
Invalid Symbol HEX file
Unrecognized or
unsupported HEX
record
Invalid data in HEX file
Exceeded max size
Error Number
-1 A general error occurred. Retry the download. If the failure persists,
it is most likely due to a hardware failure; the mobile computer
requires servicing.
-2 The user canceled the download.
-7 An error occurred opening the source device (either radio card or
Serial port). Check source device connectivity and retry.
-8 An error occurred opening the destination device (either flash ROM
or Power Micro). Retry the download. If the failure persists, it is
most likely due to a hardware failure; the mobile computer requires
servicing.
-9 The source device (either radio card or Serial port) could not be
read from. Check source device connectivity and retry.
-10 The destination device (either flash ROM or Power Micro) could not
be written to. Retry the download. If the failure persists, it is most
likely due to a hardware failure; the mobile computer requires
servicing.
-11 An error occurred during transmission from the source device
(either radio card or Serial port) and the checksum check failed.
Check source device connectivity and retry.
-12 A checksum, generated from reading back data that was written to
the destination device, was incorrect. An error during transmission
or a write error to the destination device could cause this.
-14 There is no more heap space available for the download procedure.
Restart IPL and retry the download. If the failure persists, contact
service with details of what is being downloaded.
-21 A Symbol HEX file download was attempted but the HEX file is
invalid. Ensure the file is in Symbol HEX file format.
-23 A Symbol HEX file download was attempted but the HEX file is
invalid. Ensure the file is in Symbol HEX file format.
-24 The Symbol HEX file being downloaded contains an invalid or
unrecognized HEX record. Ensure the file is in proper Symbol HEX
file format.
-25 The Symbol HEX file being downloaded contains invalid data.
Ensure the file is in proper Symbol HEX file format with valid HEX
data.
-26 The download file is too large to fit into the space allocated for it.
Either make the file smaller or increase the space allocated for it by
altering the partition table.
Application Deployment for WinCE 5.0 7 - 19
Probable Cause