Log On/Off Application; User Already Logged In; No User Logged In; Device Username Field - Symbol MC909X Integrator Manual

4 - 42 MC909X Integrator Guide

Log On/Off Application

When the user launches the
be logged onto the mobile computer by already entering credentials through the login box, or there are no user
logged on. Each of these states have a separate set of use cases and a different look to the dialog box.

User Already Logged In

If already logged into the mobile computer, the user can launch the login dialog box for the following reasons:
Connect to and re-enable a cancelled profile. To do this:
•
-
Launch the password dialog.
-
Select the cancelled profile from the profile list.
-
Login to the profile.
NOTE Re-enable cancelled profiles using the Profile Editor Wizard and choosing to connect to the cancelled
profile. Cancelled profiles are also re-enabled when a new user logs on.
Log off the mobile computer to prevent another user from accessing the current users network privileges.
•
Switch mobile computer users to quickly logoff the mobile computer and allow another user to log into the
•
mobile computer.

No User Logged In

If no user is logged into the mobile computer, launch the login dialog box and log in to access user profiles.
The dialog box varies if it is:
Login
Launched by WCS, because the service is connecting to a new profile that needs credentials.
•
Launched by WCS, because the service is trying to verify the credentials due to credential caching rules.
•
Launched by a user, when a user is logged in.
•
Launched by a user, when no user is logged in.
•

Device Username Field

The device username is a high level username used to link different network credentials to the same person as
explained above. The Device Username field is only writable when there is no user logged on. Otherwise it is
static text. The Device Username has a maximum length defined in the
application, the mobile computer may be in two states; the user may
Log On/Off
WCSAPI.