Ad-Hoc; Authentication - Symbol MC909X Integrator Manual

Ad-Hoc

Use the dialog box to select the required information to control
Ad-Hoc
appear if you selected
Select a channel number from the
1.
Ad-Hoc Settings Dialog Box
Figure 4-7
Tap Next. The
2. Encryption

Authentication

Use the
Authentication
select because Ad-Hoc authentication is not supported.
None
Select an authentication type from the drop-down list and tap
dialog box. Selecting
Tunneled
4-17 for encryption options.
Authentication Dialog Box
Figure 4-8
Authentication Options
Table 4-6
Authentication
None Default setting when authentication is not required on the network.
EAP TLS Select this option to enable EAP TLS authentication. EAP TLS is an authentication
scheme through IEEE 802.1x. It authenticates users and ensures only valid users can
connect to the network. It also restricts unauthorized users from accessing transmitted
information by using secure authentication certificates.
mode. To select Ad-Hoc mode:
Infrastructure
drop-down list. The default is
Channel
dialog box displays. See
dialog box to configure authentication. If you selected
, , or
None TLS LEAP
Table 4-6 lists the available authentication options.
Ad-Hoc
Encryption on page 4-17
. Selecting
Next
displays the dialog box. See
Encryption
Description
Wireless Applications
mode. This dialog box does not
.
Channel 1 (2412 MHz)
for encryption options.
mode, you can only
Ad-Hoc
or displays the
PEAP TTLS
Encryption on page
4 - 9