Automatic Synchronization - Symbol MC909X Integrator Manual

7 - 34 MC909X Integrator Guide
The
Status List
•
Tap to return to the Main Menu. This button remains inactive until the synchronization process is
OK
•
complete.
Tap to restart the synchronization process. This button is activated only if there is an error during
Retry
•
the synchronization process.

Automatic Synchronization

The AirBEAM Smart Client can be configured to launch automatically using the Misc(1) Preference tab (see
Misc(1) Tab on page
specify how the AirBEAM Smart Client should be invoked automatically when the client device is rebooted.
See Misc(1) Tab on page 7-30
AirBEAM Staging
The AirBEAM Smart staging support is intended to speed up and simplify the process of staging custom or
updated operating software onto mobile devices directly from manufacturing. The staging support is part of the
AirBEAM Smart CE Client that is integrated into the vehicle computer.
The AirBEAM Smart support works by defaulting the AirBEAM Client configuration to a known set of values
and launching the AirBEAM Smart package download logic. A staging environment, including an RF network,
FTP server and AirBEAM packages must be setup. Ideally a staging network and server should be setup to
match the default AirBEAM Staging client configuration.
The AirBEAM Smart staging utility is invoked from the Application directory (tap
>
Explorer Windows
The AirBEAM Staging support provides several benefits:
Many devices can be simultaneously loaded over the RF network.
•
The AirBEAM staging utility provides a simple single dialog user interface that is used to quickly start the
•
software installation process.
displays status messages that indicate the progress of the synchronization process.
7-30). When setting automatic synchronization, use the Auto-load drop-down list to
for instructions on enabling Auto Sync.
).
> >
Start Programs File