Trace Route Window - Symbol MC909X Integrator Manual

4 - 34 MC909X Integrator Guide
ICMP Ping Window
Figure 4-42
To perform an ICMP ping:
In the field, enter an IP address or select an IP address from the drop-down list.
1. IP
From the
2. Size
Tap . The ICMP Ping test starts. Information of the ping test displays in the appropriate fields.
3. Start Test

Trace Route Window

traces a packet from a computer to a host, showing how many hops the packet requires to reach
Trace Route
the host and how long each hop takes. The
The window allows testing a connection at the network layer (part of the IP protocol) between the
Trace Route
mobile computer and any place on the network.
To open the
Trace Route
Trace Route Window
Figure 4-43
Enter an IP address or a DNS Name in the IP combo box, and tap
the information shown in the
to find all routers between the mobile computer and the destination. The Round Trip Time (RTT) between the
drop-down list, select a size value.
Trace Route
window, tap
Trace Route
window's IP combo box. When starting a test, the trace route attempts
ICMP Ping
utility identifies where the longest delays occur.
in the
Wireless Diagnostics
Start Test
window.
. The IP combo box should match