Symbol MC909X Integrator Manual page 38

1 - 16 MC909X Integrator Guide
Locking the SIM Card Housing
Figure 1-11
Replace the SIM door with one screw.
8.
Replacing the SIM Door
Figure 1-12
Press the red Power button.
9.
NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card. If you do
swap SIM cards, perform step 10.
On the MC9097, you must preform a master rest after installing a new SIM card.
10.
Tap >
a. Start
Tap the
b. Master Reset
Tap .
c. OK
Once an "X" appears in the Phone Antenna icon (wait a few seconds), perform a warm boot.
d.
Wait for the mobile computer to reboot and then perform a second warm boot.
e.
Tap >
11. Start Phone
Current network:
Make a call to verify connection.
12.
NOTE For detailed information about WWAN activation and settings, refer to
or
On the MC9097, if the SIM door is removed without removing the SIM card, you must warm boot the
mobile computer.
> >
Phone Menu Options
button.
> > >
Menu Options Network
field.
Chapter 6, MC9097 Configuration.
> tab.
Error Log
tab and verify that the service provider appears in the
Chapter 5, MC9094 Configuration