Communication Setup; Using The Serial/Charging Cable With Activesync - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide

Communication Setup

The terminal can communicate with the host computer using the following accessories:
• Serial/Charging Cable
• Single Slot Serial Cradle
• Single Slot Modem Cradle
• Snap-on Modem
• 4-Slot Ethernet Cradle.
For each accessory, follow the instructions on configuring the host computer, setting up the
connection between the terminal and the host computer and configuring the terminal.

Using the Serial/Charging Cable with ActiveSync

1. Install ActiveSync on the host computer. See
2. Start ActiveSync on the host computer (Start - Programs - Microsoft ActiveSync).
Click File - Connection Settings and select the settings shown in
the appropriate COM port for the host PC).
Figure 4-2. Host ActiveSync Connection Settings
4-6
Installing ActiveSync
Figure 4-2
on page 4-3
(select