Symbol MC909X Integrator Manual page 251

Troubleshooting the Mobile Computer (Continued)
Table 9-1
Problem
Mobile computer turns
itself off.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the mobile
computer memory is
full.
Cause
Mobile computer is The mobile computer turns off after a period of inactivity. If
inactive. the mobile computer is running on battery power, this period
can be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the mobile
computer is running on external power, this period can be
set to 1, 2, 3, 5, 10, 15 and 30 minutes.
For Windows Mobile 5.0 devices, Check the power settings
by tapping
Advanced
For WinCE 5.0 devices, Check the power settings by
tapping
Power Off
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Battery is depleted. Replace the battery.
Battery is not inserted Insert the battery properly (see
properly. Main Battery on page
LCD screen not Re-calibrate the screen.
aligned correctly.
The system is hung. Warm boot the system. To perform a warm boot (see
Resetting the Mobile Computer on page
Too many files stored Delete unused memos and records. You can save these
on the mobile records on the host computer.
computer.
Too many If you have installed additional applications on the mobile
applications installed computer, remove them to recover memory.
on the mobile
For Windows Mobile 5.0 devices, tap
computer.
System
For WinCE 5.0 devices, tap
>
Remove Programs
Select the unused program and tap Remove.
Maintenance & Troubleshooting
Solution
> >
Start Settings System
tab.
> >
Start Settings Control Panel
tab.
Installing and Removing the
1-6).
tab > icon.
Remove Programs
>
Start
icon.
9 - 3
tab > icon >
Power
> icon >
Power
1-12).
> >
Start Settings
>
Settings Control Panel