Battery Charging Indicators; Serial/Usb Connection - Symbol MC909X Integrator Manual

2 - 26 MC909X Integrator Guide
Serial Port
CAM Serial Connection
Figure 2-26

Battery Charging Indicators

To charge the mobile computer's battery through the CAM, connect the power supply to the CAM (see
2-25 on page 2-25), then attach the CAM to the mobile computer. The mobile computer begins charging
automatically.
NOTE Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient temperature range.
The mobile computer's amber charge LED, located in the Indicator LED Bar, shows the status of the battery
charging in the mobile computer. See
charges in less than four hours, if the mobile computer is not in use.

Serial/USB Connection

The CAM can connect to and communicate with a serial/USB device, such as a printer or host computer,
through its serial port. See
setup procedure.
To connect the CAM to a serial/USB device, connect one end of the serial device cable into the serial port on
the CAM and the other end into the serial/USB port on the device.
To Device
Serial/USB
Port
Table 1-2 on page 1-8
Serial Communication Setup on page 2-47
for charging status indications. The battery usually
for the host computer communication
Figure