Changing A Pin; Disabling A Pin - Symbol MC909X Integrator Manual

Enter PIN
Figure 5-12
Use the touch keypad to enter a four to eight digit PIN.
2.
Tap to enable the PIN and return to the
3. Enter

Changing a PIN

CAUTION If you enter an incorrect PIN, the message 'SIM PIN incorrect: Try again' appears. After three
consecutive incorrect attempts, the SIM card is blocked. The phone does not allow you to attempt to
enter your PIN again and you must obtain a PIN Unblock Key from your service provider.
From the tab (Figure 5-11 on page
1. Phone
Use the touch keypad to enter the current PIN.
2.
Tap .
3. Enter
Use the touch keypad to enter a new four to eight digit PIN.
4.
Tap .
5. Enter
Reenter the new PIN for confirmation and tap
6.
Tap to confirm the change.
7. ok

Disabling a PIN

From the tab (Figure 5-11 on page
1. Phone
Use the touch keypad to enter the current PIN.
2.
Tap Enter.
3.
Tap ok to confirm the change.
4.
Tap ok to exit settings.
5.
tab.
Phone
5-8), tap .
Change PIN
.
Enter
5-8), deselect the
Require PIN when phone is used
MC9094 Configuration
check box.
5 - 9