Calibrating The Screen - Symbol SPT 1700 Series Product Reference Manual

b. Press any other button to perform a soft reset.
Note: With a hard reset, the current date and time are retained. Formats
Preferences and other settings are restored to their factory default
settings.
After initial start up, always start the terminal by pressing the red power button.

Calibrating the Screen

The first time you start your SPT 1700 (or after a hard reset), the calibration screen appears.
Follow the steps in this section to align the internal circuitry of your SPT 1700 with its touch-
sensitive screen.
Note: If your SPT 1700 unit came pre-loaded with a custom software
application, you may not need to calibrate your screen, in which case
you will not see the calibration screen.
To calibrate your SPT 1700 upon first time use:
1. Press the power button on the front panel of your SPT 1700 to display the calibration
screen. (This screen also displays following a hard reset).
2. Remove the stylus from its storage silo on the back of the SPT 1700.
Power
Button
Getting Started with the SPT 1700
1-15