1 - 10 MC909X Mobile Computer User Guide
Starting the Mobile Computer
Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a
cold boot. See
Resetting the Mobile Computer on page
NOTE When a battery is fully inserted in a mobile computer for the first time, upon the mobile computer's first
power up, the device boots and powers on automatically.
When the mobile computer is powered on for the first time, it initializes its system. The splash screen
appears for a short period of time.
MC9090/4
Splash Window
Figure 1-7
Calibrating the Screen
To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the
1.
screen.
NOTE To re-calibrate the screen at anytime, press FUNC + ESC on the mobile computer to launch the calibration
screen application.
Repeat as the target moves around the screen or press ESC to cancel.
2.
Checking Battery Status
To check whether the main battery or backup battery in the mobile computer is charged:
•
On Windows CE 5.0 devices: tap
window.
•
On Windows Mobile 5.0 devices: tap
To save battery power, set the mobile computer to turn off after a specified number of minutes.
2-49.
OR
MC9097
>
>
Start
Settings
Control Panel
>
>
Start
Settings
System
>
icon to display the
Power
tab >
icon to display the
Power
(Figure
1-7)
Battery Status
window.
Power