Upgrade The Firmware And Reboot The Intercom - CyberData 011113 series Operation Manual

2.3.13 Upgrade the Firmware and Reboot the Intercom

Note
Note
To upload the firmware from your computer:
1. Retrieve the latest Intercom firmware from the Downloads page at:
http://www.cyberdata.net/products/voip/digitalanalog/intercomkeypad/downloads.html
2. Unzip the Intercom version file. This file may contain the following:
•
•
3. Log in to the Intercom home page as instructed in
Home
Operations Guide
To guard against failed firmware upgrades, units shipped from CyberData with firmware
version 5.1.2 and later feature a built-in "fail safe" mechanism. Note that field upgrading
earlier units with v5.x.x will not allow for this feature.
Any units that have shipped with firmware version 6.0.0 or later will not be able to run
firmware that is version 5.1.2 or earlier.
Firmware file
Release notes
Page".
930323A
Installing the VoIP Indoor Intercom with Keypad
Section 2.3.2, "Log in to the Configuration
CyberData Corporation
60
Parts List