Configuring RADIUS
Configure the RADIUS server with the correct VLAN information.
Use vendor documentation to make the required changes.
There are three attributes that the RADIUS server sends back to the NAS (switch) for RADIUS-
assigned VLANs. These attributes are the same for all RADIUS vendors:
• Tunnel-Medium-Type – 802
• Tunnel-Pvt-Group-ID – <VLAN ID>
• Tunnel-Type – Virtual LANs (VLAN)
Configure switch
The VLAN must be configured correctly on the Ethernet Routing Switch 2500 Series device.
Task flow: Configure switch
The following task flow assists you to configure the VLAN on the device.
Troubleshooting
EAP RADIUS VLAN is not being applied
November 2010
71