4.8.4 Side Margin menu
Set up the right and left margin (side margin) while printing.
Setup Item
Count
<3 mm> to 25 mm
—
Notes
•
When selecting "On Media" in the Flushing menu, the value of the Side Margin is set automatically.
4.8.5 Media Initial menu
Set up whether the media width and edge are to be detected when initializing the media.
Setup
Setting Value
Item
Init.
Off
Top&Width
<Width>
—
4.8.6 Media Width / Media Width menu
If media detection is switched OFF, the media width menu allows you to manually enter the media width.
(1) Media Width menu
Notes
•
Setting a larger value than the media width set in the Media Width menu may cause ink to be fired onto
the printer.
Setup Item
Media Width
210 mm to <1,000 mm> to
1,225 mm
—
Setting Value
Set the side margin.
•
•
The media is not detected.
•
Set the media width that is set in the Media Width menu when setting
"Off" in the Media detection menu,
► Media Width / Media Width menu
Detect the media width and edge while initializing the media.
Detect the media width while initializing the media.
•
[Enter] key: Save the setting value and shift to the previous hierarchy.
•
[Cancel] key: Cancel the setting value and shift to the previous
hierarchy.
► Setup menu
Setting Value
Description
[Enter] key: Save the setting value and shift to the previous
hierarchy.
[Cancel] key: Cancel the setting value and shift to the
previous hierarchy.
► Setup menu
Description
Notes
Set the media width.
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to the
previous hierarchy.
► Setup menu
83
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Description
AP-75740 – Rev 1.1 – 23/01/2007