Function Key - Christie roadie 25k User Manual

OPERATION
3-12
Roadie 25K User's Manual

Function Key

Func
IF WITHIN A MENU:
noted with the appropriate topic elsewhere in Section 3. For example, press
the Channel Setup menu to enable deletion or copying of a channel.
IF WITHIN A PRESENTATION:
digit number to enable a specific color or colors in the
display (see right). For example,
display only red and green data,
display all color data. Eliminating one or more colors can
help with certain diagnostics and setups, such as when
accurately overlaying one image on top of another from
stacked projectors.
NOTE: Color enabling can also be implemented from numerous locations within the
menu system.
Projector
Proj
Press to access a specific projector within a group of projectors or to confirm if
Proj
the local projector is listening. The number in the "Enter Number" window indicates
which projector is currently listening to commands, and will match the projector
number that has been defined in the Menu Preferences menu.
The "Projector" checkbox (read-only) shows whether or not the projector physically
connected to a keypad is listening to commands from that keypad. A checkmark
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To control a specific projector with the keypad, enter the 3-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are
currently using, the checkmark will disappear.
To broadcast to multiple projectors, press
a projector number. Keypad commands will then affect all projectors present. Note
that there is no method of controlling a group of projectors within the same wired
configuration using the wired keypad exclusively, since there is only one wired
protocol available.
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be selected
for only one (any) projector in a serial network. The keypad in use must be OFF
(disabled) for the remaining projectors. See also 2.14 Remote Keypad Protocols and
Conversion, and 3.8, Adjusting System Parameters and Advanced Controls.
Enter
Press (or
Enter
toggle a checkbox, or to accept a parameter adjustment and return to the previous
menu or image.
Exit
Exit
Press to return to the previous level, such as the previous menu.
Exit
NOTE: does not save changes within text editing boxes (including number
Exit
editing of a slidebar value) or within pull-down lists. It acts as a "cancel".
Using the key for special tasks within the menu system is
Func
Press followed by a 2-
Func
Func 6
Func 6
on the standard remote keypad) to select a highlighted item, to
will
4
will
7
and then again without entering
Proj Proj
in
Func