Christie roadie 25k User Manual page 92

OPERATION
Auto Power-up
Enter a checkmark to enable the projector to automatically power up after losing
power due to a power failure or due to unplugging the projector during operation.
Note that unsaved display adjustments may be lost.
Set Date & Time
Enter/read the current year-month-day and hour-minute-second. Changes here reset
the projector's real-time clock.
Menu Preferences
— SUBMENU
Use the options in this submenu
to adjust the appearance, content
and/or location of on-screen
menus and messages.
LARGE MENU FONT —
Enter a
checkmark to enlarge menus and
their text. You may have to adjust
"Menu Location" to
accommodate the increased menu area.
MENU LOCATION —
Use the pull down list to choose a pre-defined default or
customized location for the display of all on-screen menus.
To create a custom menu location quickly, choose a preset that is closest to the
desired location. Then adjust the slidebars of Horizontal Shift and Vertical Shift to
move the menu to the desired location. To prevent cropping of larger menus, avoid
locations too close to a corner or edge.
HORIZONTAL AND VERTICAL SHIFT —
Shift your menus as desired, creating a
customized menu location.
DISPLAY CHANNEL LIST —
Enter a checkmark if you want to see a scrollable channel
list whenever you press Chan from your presentation. Channels marked with a list
icon in the Channel Setup menu will then appear here. The Display Channel List
option also enables on-screen feedback when using the Input key. If you prefer to hide
the channel list and input dialog box while switching channels and sources during a
presentation, clear the checkbox.
NOTE: The Channel List and input dialog box cannot be hidden during use of the
menus.
DISPLAY SLIDEBARS —
Enter a checkmark to superimpose a small slidebar over the
current image whenever an adjustable parameter is selected directly with a key such
Bright
as or . If "Display slidebars" is unchecked, these slidebars can still be
accessed, but will be hidden during adjustment. This option does not affect slidebars
in menus.
DISPLAY ERROR MESSAGES —
Choose how you want to be notified of errors
detected in either the incoming signal or projector. Select "Screen" or "All" (default)
to see brief on-screen messages. This is particularly recommended during setup or
testing of the projector. Or select "RS232" to receive messages via RS232 (or
RS422) serial communication only. To hide error message displays, such as during
shows and presentations, select "Off" or "RS232".
3-38
Roadie 25K User's Manual